JANTX1N4132

SILICON 400mA LOW NOISE ZENER DIODES

•1N4099UR-1THRU1N4135UR-1AVAILABLEINJAN,JANTX,JANTXVANDJANSPERMIL-PRF-19500/435 •LEADLESSPACKAGEFORSURFACEMOUNT •LOWCURRENTOPERATIONAT250µA •METALLURGICALLYBONDED MAXIMUMRATINGS JunctionandStorageTemperature:-65°Cto+175°C DCPowerDissipation:50

JANTX1N4132

SILICON 500mA LOW NOISE ZENER DIODES

•1N4099UR-1THRU1N4135UR-1AVAILABLEINJAN,JANTX,JANTXVANDJANSPERMIL-PRF-19500/435 •LEADLESSPACKAGEFORSURFACEMOUNT •LOWCURRENTOPERATIONAT250µA •METALLURGICALLYBONDED MAXIMUMRATINGS JunctionandStorageTemperature:-65°Cto+175°C DCPowerDissipation:50

JANTX1N4132-1

SILICON 500mA LOW NOISE ZENER DIODES

•1N4099UR-1THRU1N4135UR-1AVAILABLEINJAN,JANTX,JANTXVANDJANSPERMIL-PRF-19500/435 •LEADLESSPACKAGEFORSURFACEMOUNT •LOWCURRENTOPERATIONAT250µA •METALLURGICALLYBONDED MAXIMUMRATINGS JunctionandStorageTemperature:-65°Cto+175°C DCPowerDissipation:50

JANTX1N4132C

SILICON 400mA LOW NOISE ZENER DIODES

•1N4099UR-1THRU1N4135UR-1AVAILABLEINJAN,JANTX,JANTXVANDJANSPERMIL-PRF-19500/435 •LEADLESSPACKAGEFORSURFACEMOUNT •LOWCURRENTOPERATIONAT250µA •METALLURGICALLYBONDED MAXIMUMRATINGS JunctionandStorageTemperature:-65°Cto+175°C DCPowerDissipation:50

JANTX1N4132C-1

Zener Diode 82V, 500mW, ±2% Through Hole DO-204AH (DO-35); Flexible axial-lead mounting terminals.\n Regulates voltage over broad ranges of current and temperature.\n Extensive selection from 1.8 to 100 volts.\n Voltage tolerances of 5% (standard), 2% and 1% are available.\n Hermetically sealed surface mount package.\n Non-sensitive to ESD per MIL-STD-750 method 1020.\n Minimal capacitance (see Figure 3).\n Inherently radiation hard as described in Microchip MicroNote 050.;

The 1N4099-1 through 1N4135-1 and 1N4614-1 through 1N4627-1 series are 500 mW, Zener voltage regulators in the axial-leaded, glass DO-35 package. Voltages from 1.8 to 100V in 5%, 2%, and 1% tolerances are available. They are constructed with an internal metallurgical bond and are mil-qualified up to the JANS level for high reliability applications.

JANTX1N4132CUR

GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The1N4099URthru1N4135URand1N4614URthru1N4627URseriesof0.5wattglasssurfacemountDO-213AAZenervoltageregulatorsprovidesaselectionfrom1.8to100voltsinstandard5tolerancesaswellastightertolerancesidentifiedbydifferentsuffixlettersonthepartnumber.

JANTX1N4132CUR-1

SILICON 400mA LOW NOISE ZENER DIODES

•1N4099UR-1THRU1N4135UR-1AVAILABLEINJAN,JANTX,JANTXVANDJANSPERMIL-PRF-19500/435 •LEADLESSPACKAGEFORSURFACEMOUNT •LOWCURRENTOPERATIONAT250µA •METALLURGICALLYBONDED MAXIMUMRATINGS JunctionandStorageTemperature:-65°Cto+175°C DCPowerDissipation:50

JANTX1N4132CUR-1

GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The1N4099URthru1N4135URand1N4614URthru1N4627URseriesof0.5wattglasssurfacemountDO-213AAZenervoltageregulatorsprovidesaselectionfrom1.8to100voltsinstandard5tolerancesaswellastightertolerancesidentifiedbydifferentsuffixlettersonthepartnumber.

JANTX1N4132CUR-1

Zener Diode Single 2-Pin 82V, 2%, 800Ohm, 500mW DO-213AA Bag; JEDEC registered 1N4099 through 1N4135 and 1N4614 through 1N4627 series. \nInternal metallurgical bond. \nMax noise density 40 μV / √Hz for 6.8 V and up.\n Falls quickly to 1 μV / √Hz at lower voltages. \nJAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435. \nRoHS compliant versions available (commercial grade only). \nFlexible axial-lead mounting terminals.\n Regulates voltage over broad ranges of current and temperature. \nExtensive selection from 1.8 to 100 volts. \nVoltage tolerances of 5% (standard), 2% and 1% are available. \nHermetically sealed surface mount package. \nNon-sensitive to ESD per MIL-STD-750 method 1020. \nMinimal capacitance (see Figure 3). \nInherently radiation hard as described in Microchip MicroNote 050.;

The 1N4099UR-1 through 1N4135UR-1 and 1N4614UR-1 through 1N4627UR-1 series are 500 mW, Zener voltage regulators in the axial-leaded, glass DO-213AA package. Voltages from 1.8 to 100V in 5%, 2%, and 1% tolerances are available. They are constructed with an internal metallurgical bond and are mil-qualified up to the JANS level for high reliability applications.

JANTX1N4132CURTR

GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The1N4099URthru1N4135URand1N4614URthru1N4627URseriesof0.5wattglasssurfacemountDO-213AAZenervoltageregulatorsprovidesaselectionfrom1.8to100voltsinstandard5tolerancesaswellastightertolerancesidentifiedbydifferentsuffixlettersonthepartnumber.