JANTX1N3024

1 WATT METAL CASE ZENER DIODES

JANTX1N3024BUR-1

Zener Diode Single 2-Pin 15V, 5%, 14Ohm, 1000mW DO-213AB Bag; Hermetically sealed, double plug glass construction. \nMetallurgically bonded. \nVoltage tolerances of 5%, 2%, and 1% available. \nRoHS compliant versions available (commercial grade only). \nRegulates voltage over a broad operating current and temperature range. \nWide selection from 6.8 to 110 V. \nLow reverse (leakage) currents. \nLeadless package for surface mounting. \nMetallurgically enhanced internal contact design for greater reliability and lower thermal resistance. Non-sensitive to ESD. \nInherently radiation hard as described in Microchip “MicroNote 050”.;

This surface mountable Zener diode series is similar to the 1N3016B-1 through 1N3045B-1 JEDEC registration in the DO-13 package except that it meets the surface mount DO-213AB outline. It is an ideal selection for applications of high density and low parasitic requirements. Due to its glass hermetic seal qualities and metallurgically enhanced internal construction, it is also well suited for high-reliability applications where it is available in JAN, JANTX, and JANTXV military qualifications. Lower voltages are also available in the 1N3821AUR-1 through 1N3828AUR-1 series (3.3 V to 7.5 V) in the same package (see separate data sheet).

JANTX1N3024A

1 WATT METAL CASE ZENER DIODES

JANTX1N3024ATR

1 WATT METAL CASE ZENER DIODES

JANTX1N3024ATRUR-1

1 WATT METAL CASE ZENER DIODES

JANTX1N3024AUR-1

1 WATT METAL CASE ZENER DIODES

JANTX1N3024B

1 WATT METAL CASE ZENER DIODES

JANTX1N3024BTR

1 WATT METAL CASE ZENER DIODES

JANTX1N3024BTRUR-1

1 WATT METAL CASE ZENER DIODES

JANTX1N3024BUR-1

1 WATT METAL CASE ZENER DIODES