IXZ-2510数据手册传感器变送器的运动传感器-陀螺仪规格书PDF

描述 Description

The IXZ-2510 is a single-chip, digital-output, 2-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful for precision tracking of both fast and slow motions. Factory-calibrated initial sensitivity reduces production-line calibration requirements. The part’s on-chip FIFO simplifies system timing and lower system power consumption. The FIFO allows a system microcontroller to burst read the sensor data and then go to sleep while the IXZ-2510 collects more data.
Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, a precision clock with 1% variation from -40°C to 85°C, an embedded temperature sensor, and programmable interrupts. Parts are available with a Fast-Mode I²C serial interface, a VDD operating range of 1.71 to 3.6V, and a VDDIO voltage from 1.71V to 3.6V.
By leveraging its patented and volume-proven InvenSense Fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the IXZ-2510 package size down to a footprint of 3x3x0.9mm (QFN), while providing the highest performance, lowest noise, and the lowest cost semiconductor packaging to address a wide range of handheld consumer electronic devices. The device provides the highest robustness by supporting 10,000g shock in operation. The highest cross-axis isolation is achieved by design from its single silicon integration.

特性 Features

• X- & Z-Axis angular rate sensors (gyros) on one integrated circuit
• Angular rate sensors (gyros) with user-programmable full-scale-range of ±250°/sec, ±500°/sec, ±1000°/sec, or ±2000°/sec.
• Low power consumption with both axes active: 2.8mA
• 16-bit ADCs for digitizing sensor outputs
• Programmable low-pass filters
• FIFO buffers complete data set, reducing timing requirements on the system processor and saving power by letting the processor burst read the FIFO data, and then go into a low-power sleep mode while the device collects more data.
• VDD supply voltage range of 1.71V to 3.6V
• I2C and SPI interface
• Small 3x3x0.9mm QFN package
• RoHS and Green compliant

简介

IXZ-2510属于传感器变送器的运动传感器-陀螺仪。由制造生产的IXZ-2510运动传感器 - 陀螺仪陀螺仪运动传感器 IC 和模块用于测量或保持一个或多个轴上的方向和角速度。轴可能包括 X（俯仰）、Y（翻滚）和 Z（偏航），旋转范围从 100 到 6000 度。陀螺仪可根据灵敏度、模拟或数字、电源电压、外壳样式和输出类型（例如模拟、I2C 和 SPI）进行选择。