BCD-to-Decimal Decoder High-Voltage Silicon-Gate CMOS

BCD-to-Decimal Decoder High-Voltage Silicon-Gate CMOS The IW4028B types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four inputs, A0 to A3 results in a high level at the selected

文件：222.08 Kbytes 页数：6 Pages

IKSEMICON

BCD-to-Decimal Decoder High-Voltage Silicon-Gate CMOS

BCD-to-Decimal Decoder High-Voltage Silicon-Gate CMOS The IW4028B types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four inputs, A0 to A3 results in a high level at the selected one

文件：181.41 Kbytes 页数：5 Pages

INTEGRAL

Integral Corp.

BCD-to-Decimal Decoder High-Voltage Silicon-Gate CMOS

BCD-to-Decimal Decoder High-Voltage Silicon-Gate CMOSThe IW4028B types are BCD-to-decimal or binary-to-octal decoders consisting of buffering on all 4 inputs, decoding-logic gates, and 10 output buffers. A BCD code applied to the four inputs, A0 to A3 results in a high level at the selected one of 1

IKsemicon

BCD - TO -DECIMAL DECODER

TC4028B is a BCD-to-DECIMAL decoder which converts BCD signal into DECIMAL signal. Of ten outputs from Q0 to Q9, one output corresponding to input BCD code goes to the “H” level and all the others remain at the “L” level. When D is used as inhibit input by use of three input lines from A to C, thi

文件：223.12 Kbytes 页数：5 Pages

TOSHIBA

东芝

BCD - TO -DECIMAL DECODER

TC4028B is a BCD-to-DECIMAL decoder which converts BCD signal into DECIMAL signal. Of ten outputs from Q0 to Q9, one output corresponding to input BCD code goes to the “H” level and all the others remain at the “L” level. When D is used as inhibit input by use of three input lines from A to C, thi

文件：223.12 Kbytes 页数：5 Pages

TOSHIBA

东芝

BCD - TO -DECIMAL DECODER

TC4028B is a BCD-to-DECIMAL decoder which converts BCD signal into DECIMAL signal. Of ten outputs from Q0 to Q9, one output corresponding to input BCD code goes to the “H” level and all the others remain at the “L” level. When D is used as inhibit input by use of three input lines from A to C, thi

文件：223.12 Kbytes 页数：5 Pages

TOSHIBA

东芝