IT6605

IT6605: Dual-Port HDMI 1.4 Receiver with 3D Support; • • Dual-port HDMI 1.4 receiver\n• Pin compatible with CAT6023\n• Compliant with HDMI 1.3, HDMI 1.4a 3D, HDCP 1.4 and DVI 1.0 specifications\n• Supporting link speeds of up to 2.25Gbps (link clock rate of 225MHz).\n• Supporting all the primary 3D formats which are compliant with the HDMI 1.4a 3D specification.\n• Supporting 3D video up to 1080P@50/59.95/60Hz, 1080P@23.98/24/29.97/30Hz, 1080i@50/59.94/60/Hz, 720P@23.98/24/29.97/30Hz, 720P@50/59.94/60Hz\n• Supporting formats: Framing Packing, Side-by-Side ( half ), Top-and-Bottom.\n• Video output interface supporting digital video standards such as:\n• 24/30/36-bit RGB/YCbCr 4:4:4\n• 16/20/24-bit YCbCr 4:2:2\n• 8/10/12-bit YCbCr 4:2:2 (ITU BT-656)\n• 12/15/18-bit double data rate interface (data bus width halved, clocked with both rising and falling edges) for RGB/YCbCr 4:4:4\n• 24/30/36-bit double data rate interface (full bus width, pixel clock rate halved, clocked with both rising and falling edges)\n• Input channel swap\n• MSB/LSB swap\n• Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients.\n• Up/down sampling between YCbCr 4:4:4 and YCbCr 4:2:2\n• Dithering for conversion from 12-bit component to 10-bit/8-bit\n• Digital audio output interface supporting\n• up to four I2S interface supporting 8-channel audio, with sample rates of 32~192 kHz and smaple sizes of 16~24 bits\n• S/PDIF interface supporting PCM, Dolby Digital, DTS digital audio at up to 192kHz frame rate\n• Optional support for 8-channel DSD audio up to 8 channels at 88.2kHz sample rate\n• Support for high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through the four I2S interface or the S/PDIF interface, with frame rates as high as 768kHz\n• automatic audio error detection for programmable soft mute, preventing annoying harsh output sound due to audio error or hot-unplug\n• Auto-calibrated input termination impedance provides process-, voltage- and temperature-invariant matching to the input transmission lines.\n• Integrated pre-programmed HDCP keys\n• Intelligent, programmable power management\n• 144-pin LQFP (20mm x 20mm) package\n• RoHS Compliant ( 100% Green available );

The IT6605 is a dual-port HDMI receiver, fully compatible with HDMI 1.3, compatible with HDMI 1.4a 3D and HDCP 1.4 and also backward compatible to DVI 1.0 specifications. The IT6605 with its Deep Color capability (up to 36-bit) ensures robust reception of high-quality uncompressed video content, along with state-of-the-art uncompressed and compressed digital audio content such as DTS-HD and Dolby TrueHD in digital televisions and projectors. The IT6605 also supports all the primary 3D formats which are compliant with the HDMI 1.4a 3D specification.Aside from the various video output formats supported, the IT6605 also receives and provides up to 8 channels of I2S digital audio outputs, with sampling rate up to 192kHz and sample size up to 24 bits, facilitating direct connection to industry-standard low-cost audio DACs. Also, an S/PDIF output is provided to support up to compressed audio of 192kHz frame rate. Super Audio Compact Disc (SACD) is supported at up to 8 channels and 88.2kHz through DSD (Direct Stream Digital ports) ports.The High-Bit Rate (HBR) audio is also provided by the IT6605 in two interfaces: with the four I2S input ports or the S/PDIF input port. With both interfaces the highest possible HBR frame rate is supported at up to 768kHz.Each IT6605 comes preprogrammed with an unique HDCP key, in compliance with the HDCP 1.4 standard so as to provide secure transmission of high-definition content. Users of the IT6605 need not purchase any HDCP keys or ROMs.The IT6605 is pin compatible with the CAT6023, the previous HDMI 1.3 receiver.

L6605

SMARTCARDINTERFACE

DESCRIPTION TheL6605isanICdedicatedasintelligentinterfacebetweendifferenttypesofsmartcardsandmicroprocessors.Theinternalarchitecturecanbesharedinapowersupplysectionandinadiagnosticparts. ■8DIFFERENTVPPOUTPUTVOLTAGELEVELS ■VPP,VCSRISEANDFALLTIMEFULLS

L6605

60WXENONFLASHLAMPSERIES

FEATURES ■HighStability:Fluctuation(p-p)3Max. ■HighInputEnergy:1J(peroneflash) ■LongLife:8×107flashesMin. ■ShortArc:3mm ■SpectralDistribution:190nmto2000nm(Sapphireglasswindowtype) ■HighRepetitionRateMeetingTVrate:60Hz ■Shortflashpulse-width(

L6605

60WXENONFLASHLAMPSERIESBUILT-INREFLECTIVEMIRROR

IT6605

ITE
LQFP144