ISP1561BM

General description The ISP1561 is a PCI-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core and four transceivers that are compliant with Hi-Sp

文件：2.87534 Mbytes 页数：102 Pages

PHI

PHI

Hi-Speed USB PCI host controller

General description\nThe ISP1561 is a PCI-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core and four transceivers that are compliant with Hi-Speed ■Complies withUniversal Serial Bus Specification Rev. 2.0\n■Supports data transfer at high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)\n■Two Original USB OHCI cores comply withOpen Host Controller Interface Specification for USB Rev. 1.0a\n■One Hi-Speed USB EHCI core compli;

恩XP

High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs

General Description The MAX1561/MAX1599 step-up converters drive up to six white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices. The step-up converter topology allows series connection of the white LEDs so the LED currents are identical for uni

文件：245.34 Kbytes 页数：10 Pages

MAXIM

美信

2 x 23 W high efficiency car radio power amplifier

GENERAL DESCRIPTION The TDA1561Q is a monolithic power amplifier in a 13 lead single-in-line (SIL) plastic power package. It contains two identical 23 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a higher output voltage swing is needed. The device is pr

文件：244.1 Kbytes 页数：24 Pages

PHI

PHI

2 x 23 W high efficiency car radio power amplifier

GENERAL DESCRIPTION The TDA1561Q is a monolithic power amplifier in a 13 lead single-in-line (SIL) plastic power package. It contains two identical 23 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a higher output voltage swing is needed. The device is pr

文件：244.1 Kbytes 页数：24 Pages

PHI

PHI