ISP1109BS中文资料飞利浦数据手册PDF规格书

General description

The ISP1109 is a Universal Serial Bus (USB) transceiver device that supports CEA−936−A, Mini-USB Analog Carkit Interface. It is fully compliant with Universal Serial Bus Specification Rev. 2.0. The ISP1109 can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.

The ISP1109 is available in HVQFN32 package.

特性 Features

■ Fully complies with Universal Serial Bus Specification Rev. 2.0

■ Supports CEA−936−A, Mini-USB Analog Carkit Interface

■ Can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates

■ Supports Serial Parallel Interface (SPI) (up to 26 MHz) and I2C-bus (up to 400 kHz) serial interface to access control and status registers

■ Supports Universal Asynchronous Receiver-Transmitter (UART) pass-through on the DP and DM lines

■ Built-in analog switches to support analog audio signals multiplexed on the DP and DM lines

■ Supports On-The-Go (OTG) Session Request Protocol (SRP)

■ Supports Power-down mode, in which the whole chip consumes less than 20 µA power current

■ 3.0 V to 5.25 V power supply input range (VCC)

■ Supports wide range digital interfacing I/O voltage (VCC(I/O)) of 1.65 V to 3.6 V

■ ±12 kV ESD protection at pins DP, DM, ID, VBUS, VCC, GNDA and GNDD

■ Supports charger current switching (ISET) detection

■ Full industrial grade operation from −40 °C to +85 °C

■ Available in a small HVQFN32 (5 x 5 mm2) halogen-free and lead-free package.

Applications

■ Mobile phones.