ISO7321FCQDQ1.A中文资料德州仪器数据手册PDF规格书

1 Features

1• Qualified for Automotive Applications

• AEC-Q100 Qualified With the Following Results:

– Device Temperature Grade 1: –40°C to

+125°C Ambient Operating Temperature

Range

– Device HBM Classification Level 3A

– Device CDM Classification Level C6

• Signaling Rate: 25 Mbps

• Integrated Noise Filter on the Inputs

• Default Output High and Low Options

• Low Power Consumption: Typical ICC per Channel

at 1 Mbps:

– ISO7320-Q1: 1.2 mA (5-V Supplies),

0.9 mA (3.3-V Supplies)

– ISO7321-Q1: 1.7 mA (5-V Supplies),

1.2 mA (3.3-V Supplies)

• Low Propagation Delay: 33 ns

Typical (5-V Supplies)

• 3.3-V and 5-V Level Translation

• 65-kV/μs Transient Immunity,

Typical (5-V Supplies)

• Robust Electromagnetic Compatibility (EMC)

– System-level ESD, EFT, and Surge Immunity

– Low Emissions

• Isolation Barrier Life: > 25 Years

• Operates from 3.3-V and 5-V Supplies

• Narrow Body SOIC-8 Package

• Safety and Regulatory Approvals:

– 4242-VPK Isolation per DIN V VDE V 0884-10

and DIN EN 61010-1

– 3000-VRMS Isolation for 1 minute per UL 1577

– CSA Component Acceptance Notice 5A, IEC

60950-1 and IEC 61010-1 Standards

– Planned CQC Certification per GB4943.1-2011

2 Applications

• Opto-Coupler Replacement in:

– Industrial FieldBus

– ProfiBus

– ModBus

– DeviceNet™ Data Buses

– Servo Control Interface

– Motor Control

– Power Supplies

– Battery Packs

3 Description

The ISO732x-Q1 family of devices provides galvanic

isolation up to 3000 VRMS for 1 minute per UL 1577 and 4242 VPK per VDE V 0884-10. These devices

have two isolated channels comprised of logic input

and output buffers separated by silicon dioxide (SiO2)

insulation barriers.

The ISO7320-Q1 has both channels in the same

direction while ISO7321-Q1 has the two channels in opposite direction. In case of input power or signal

loss, the default output is low for orderable part

numbers with suffix F and high for orderable part

numbers without suffix F. See Device Functional

Modes for more information. Used in conjunction with

isolated power supplies, these devices prevent noise

currents on a data bus or other circuits from entering

the local ground and interfering with or damaging

sensitive circuitry. The ISO732x-Q1 family of devices

has integrated noise filters for harsh industrial

environment where short noise pulses may be

present at the device input pins. The ISO732x-Q1

family of devices has TTL input thresholds and

operate from 3-V to 5.5-V supply levels.

Through innovative chip design and layout

techniques, electromagnetic compatibility of the

ISO732x-Q1 family of devices has been significantly

enhanced to enable system-level ESD, EFT, Surge and Emissions compliance.