ISO1640BDRG4.A中文资料德州仪器数据手册PDF规格书

1 Features

• Robust Isolated Bidirectional, I2C Compatible,

Communication

– ISO1640: Bidirectional SDA and SCL

communication

– ISO1641: Bidirectional SDA and unidirectional

SCL communication

– ISO1642/3/4: Bidirectional SDA and SCL

communication with either 2 or 3 unidirectional

GPIO channels

– Hot-Swappable SDA and SCL

• Bidirectional data transfer up to 1.7 MHz Operation

• Up to 3 additional unidirectional isolated GPIO

channels supporting 50 Mbps speed

• Robust isolation barrier with enhanced EMC:

– >100-year projected lifetime at 450 VRMS

working voltage (D-8) and 1500 VRMS working

voltage (DW-16)

– Up to 5000 VRMS isolation rating per UL1577

– Up to 10 kV reinforced surge capability

– ±100 kV/μs typical CMTI

– ±8 kV IEC-ESD 61000-4-2 contact discharge

protection across isolation barrier

– Same side ±8 kV IEC-ESD unpowered contact

discharge on SCL2 and SDA2 (Side 2)

• Supply range: 3 V to 5.5 V (Side 1) and 2.25 V to

5.5 V (Side 2)

• Open-drain outputs with 3.5-mA (Side 1) and 50-

mA (Side 2) current-sink capability

• Max capacitive load: 80 pF (Side 1) and 400 pF

(Side 2)

• 16-SOIC (DW-16) and 8-SOIC (D-8) Package

Options

• –40°C to +125°C Operating Temperature

• Safety-Related Certifications (planned):

– UL 1577 Component Recognition Program

– DIN VDE V 0884-11

– IEC 62368-1, IEC 61010-1, IEC 60601-1 and

GB4943.1-2011 certifications

2 Applications

• Isolated I2C Buses

• Isolated I2C and SPI Buses

• SMBus and PMBus Interfaces

• Power Over Ethernet (PoE)

• Motor Control Systems

• Battery Management

3 Description

The ISO1640, ISO1641, ISO1642, ISO1643 and

ISO1644 (ISO164x) devices are hot swappable, lowpower,

bidirectional isolators that are compatible

with I2C interfaces. The ISO164x supports UL 1577

isolation ratings of 5000 VRMS in the 16-DW package,

and 3000 VRMS in the 8-D package. Each I2C

isolation channel in this low emissions device has

a logic input and open drain output separated by

a double capacitive silicon dioxide (SiO2) insulation

barrier. The ISO1642 and ISO1643 intregrates 2

unidirectional CMOS isolation channels, while the

ISO1644 intregrates 3 unidirectional CMOS isolation

channels which can be used for static GPIO isolation

or to isolate a Serial Peripheral Interface (SPI) bus.

This family includes basic and reinforced insulation

devices certified by VDE, UL, CSA, TUV and CQC.

The ISO1640/2/3/4 have two isolated bidirectional

channels for clock and data lines and the ISO1641

has a bidirectional data and a unidirectional clock

channel. The ISO164x family integrates logic required

to support bidirectional channels, providing a much

simpler design and smaller footprint when compared

to optocoupler-based solutions.