ISM303DAC数据手册传感器变送器的多功能规格书PDF

描述 Description

The ISM303DAC is a high-performance, low-power system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.

The ISM303DAC has user-selectable linear acceleration full scales of ±2g/±4g/±8g/±16 g and is capable of measuring accelerations with output data rates from 1 Hz to 6400 Hz. The device has a magnetic field dynamic range of up to ±50 gauss with output data rates from10 Hz to 150 Hz. The ISM303DAC includes an I2C serial bus interface that supports standard, fast mode, fast mode plus, and high-speed (100 kHz, 400 kHz, 1 MHz, and 3.4 MHz) and an SPI serial standard interface.

The ISM303DAC has an integrated 256-level first-in, first-out (FIFO) buffer for the accelerometer data which can be used to limit the intervention of the host processor.

The embedded self-test capability allows the user to check the functioning of the sensor in the final application.

The system can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection. The magnetic and accelerometer blocks can be enabled or put into power-down mode separately.

The ISM303DAC is available in a plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range from -40 °C to +85 °C.

特性 Features

• 3 magnetic field channels and 3 acceleration channels
• Up to ±50 gauss magnetic dynamic range
• ±2/±4/±8/±16 g selectable acceleration full scales
• Dynamic switching between high-resolution, high-frequency and low-power modes
• 16-bit data output
• SPI / I2C serial interfaces
• Analog supply voltage 1.71 V to 1.98 V
• Programmable interrupt generators for free-fall, motion and magnetic field detection
• Embedded self-test both for the accelerometer and magnetometer
• Embedded 256-level FIFO
• Embedded temperature sensor
• ECOPACK®, RoHS and “Green” compliant

简介

ISM303DAC属于传感器变送器的多功能。由制造生产的ISM303DAC多功能多功能传感器和变送器将两个或更多独立的传感器与驱动和输出调节电路整合在一起。数据通过单一输出类型进行通信，例如蓝牙、USB、CAN 总线、以太网、I2C、SPI 或 RS-485。组合示例包括加速计-磁力仪、湿度-压力-温度、湿度-光线-压力-声音-温度-倾斜-振动，以及加速计-陀螺仪。