3.3V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

These Intersil RS-485/RS-422 devices are BiCMOS 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for 10 tolerance supplies (3V to 3.6V).

The ISL83483 and ISL83488 utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications.

Features

• Operate from a Single +3.3V Supply (10 Tolerance)

• Interoperable with 5V Logic

• High Data Rates. . . . . . . . . . . . . . . . . . . . . up to 10Mbps

• Single Unit Load Allows up to 32 Devices on the Bus

• Slew Rate Limited Versions for Error Free Data Transmission (ISL83483, ISL83488) . . . . . .up to 250kbps

• Low Current Shutdown Mode (ISL83483, ISL83485, ISL83491). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15nA

• -7V to +12V Common Mode Input Voltage Range

• Three State Rx and Tx Outputs (Except ISL83488, ISL83490)

• 10ns Propagation Delay, 1ns Skew (ISL83485, ISL83490, ISL83491)

• Full Duplex and Half Duplex Pinouts

• Current Limiting and Thermal Shutdown for driver Overload Protection

• Pb-free available

Applications

• Factory Automation

• Security Networks

• Building Environmental Control Systems

• Industrial/Process Control Networks

• Level Translators (e.g., RS-232 to RS-422)

• RS-232 “Extension Cords”

ISL83485IB属于集成电路（IC） > 驱动器，接收器，收发器。瑞萨科技有限公司制造生产的ISL83485IB驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。