ISL81805中文资料80V Dual or 2-Phase Synchronous Boost Controller数据手册Renesas规格书

描述 Description

The ISL81805 is a dual synchronous boost controller that generates two independent outputs or one output with two interleaved phases for a wide variety of applications in industrial and general purpose segments. With a wide input and output voltage ranges, the controller is suitable for telecommunication, data center, and computing applications.

The ISL81805 uses peak current mode control with phase interleaving for the two outputs. Each output has a voltage regulator, current monitor, and average current regulator to provide independent average voltage and current control. The internal Phase-Locked Loop (PLL) oscillator assures an accurate frequency setting from 100kHz to 1MHz, and the oscillator can be synchronized to an external clock signal for frequency synchronization and phase interleave paralleling applications. This PLL circuit can output a phase-shift-programmable clock signal that is expanded to three, four, and six phases with required interleaving phase shift.

The ISL81805 features programmable soft-start and accurate threshold enable functions along with a power-good indicator to simplify power supply rail sequencing. It also provides full protection features such as OVP, UVP, OTP, and average and peak current limit on both outputs to ensure high reliability.

The IC is packaged in a space conscious 32 Ld 5 × 5 mm TQFN.

特性 Features

• Wide input voltage range: 4.5V to 80V
• Wide output voltage range: 5V to 80V
• Four MOSFET drivers with adaptive shoot-through protection
• Constant output voltage and output current feedback loop control
• Light-load efficiency enhancement
• Low ripple diode emulation and burst mode operation
• Programmable soft-start
• Supports startup into pre-biased rails
• Programmable frequency: 100kHz to 1MHz
• Support current sharing with cascade phase interleaving
• External clock sync
• Clock out with accurate phase angle controlled by PLL or frequency dithering
• PGOOD indicator
• Input current monitor
• Selectable mode between PWM/DE/Burst
• Accurate EN/UVLO threshold: ±2%
• Low shut down current: 5μA
• Complete protection: OCP (pulse by pulse and optional hiccup or constant current mode), OVP, OTP, and UVP

应用 Application

• Telecommunication
• Server and data center
• Automotive electronics
• Industrial equipment
• Power system