ISL81334IBZ集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

The ISL81334, ISL41334 are two port interface ICs where

each port can be independently configured as a single

RS-485, RS-422 transceiver, or as a dual (2 Tx, 2 Rx) RS232 transceiver. With both ports set to the same mode, two

RS-485, RS-422 transceivers, or four RS-232 transceivers

are available.

If either port is in RS-232 mode, the onboard charge pump

generates RS-232 compliant ±5V Tx output levels from a

single VCC supply as low as 4.5V. Four small 0.1µF

capacitors are required for the charge pump. The

transceivers are RS-232 compliant, with the Rx inputs

handling up to ±25V, and the Tx outputs handling ±12V.

In RS-485 mode, the transceivers support both the RS-485

and RS-422 differential communication standards. The

receivers feature full failsafe operation, so the Rx outputs

remain in a high state if the inputs are open or shorted

together. The transmitters support up to three data rates, two

of which are slew rate limited for problem free

communications. The charge pump disables when both

ports are in RS-485 mode, thereby saving power, minimizing

noise, and eliminating the charge pump capacitors.

Both RS-232 and RS-485 modes feature loopback and

shutdown functions. Loopback internally connects the Tx

outputs to the corresponding Rx input, to facilitate board

level self test implementation. The outputs remain connected

to the loads during loopback, so connection problems (e.g.,

shorted connectors or cables) can be detected. Shutdown

mode disables the Tx and Rx outputs, disables the charge

pumps, and places the IC in a low current (µA) mode.

The ISL41334 is a QFN packaged device that includes two

additional user selectable, lower speed and edge rate

options for EMI sensitive designs, or to allow longer bus

lengths. It also features a logic supply pin (VL) that sets the

VOH level of logic outputs, and the switching points of logic

inputs, to be compatible with another supply voltage in mixed

voltage systems. The QFN also adds active low Rx enable

pins to increase design flexibility, allowing Tx/Rx direction

control, via a single signal per port, by connecting the

corresponding DE and RXEN pins together.

特性 Features

• ±15kV (HBM) ESD Protected Bus Pins (RS-232 or

RS-485)

• Two Independent Ports, Each User Selectable for RS-232

(2 Transceivers) or RS-485, RS-422 (1 Transceiver)

• Single 5V (10 Tolerance) Supply

• Flow-Through Pinouts Simplify Board Layouts

• Pb-Free (RoHS Compliant)

• Large (2.7V) Differential VOUT for Improved Noise

Immunity in RS-485, RS-422 Networks

• Full Failsafe (Open/Short) Rx in RS-485, RS-422 Mode

• Loopback Mode Facilitates Board Self Test Functions

• User Selectable RS-485 Data Rates (ISL41334 Only)

- Fast Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Mbps

- Slew Rate Limited. . . . . . . . . . . . . . . . . . . . . . . 460kbps

- Slew Rate Limited. . . . . . . . . . . . . . . . . . . . . . . 115kbps

• Fast RS-232 Data Rate . . . . . . . . . . . . . . . Up to 650kbps

• Low Current Shutdown Mode. . . . . . . . . . . . . . . . . . .42µA

• QFN Package Saves Board Space (ISL41334 Only)

• Logic Supply Pin (VL) Eases Operation in Mixed Supply

Systems (ISL41334 Only)

Applications

• Gaming Applications (e.g., Slot Machines)

• Single Board Computers

• Factory Automation

• Security Networks

• Industrial/Process Control Networks

• Level Translators (e.g., RS-232 to RS-422)

• Point of Sale Equipment

• Dual Channel RS-485 Interfaces