ISL78201AVEZ集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF中文资料

The ISL78201 is an AEC-Q100 qualified 40V, 2.5A synchronous

buck or boost buck controller with a high-side MOSFET and

low-side driver integrated. In buck mode, the ISL78201 supports

a wide input range of 3V to 40V. In boost-buck mode, the input

range can be extended down to 2.5V and output regulation can be

maintained when VIN drops below VOUT, enabling sensitive

electronics to remain on during cold-cranking and start-stop

applications.

The ISL78201 has a flexible selection of operation modes

including forced PWM mode and an optional switch to PFM mode

for light loads. In PFM mode, the quiescent input current is as low

as 300µA and can be further reduced to 180µA with AUXVCC

connected to VOUT under 12V VIN and 5V VOUT application. The

load boundary between PFM and PWM can be programmed to

cover wide applications.

Features

• Buck Mode: input voltage range 3V to 40V (refer to “Input

Voltage” on page 15 for more details)

• Boost mode expands operating input voltage lower than 2.5V

(refer to “Input Voltage” on page 15 for more details)

• Selectable forced PWM mode or PFM mode

• 300µA IC quiescent current (PFM, no load); 180µA input

quiescent current (PFM, no load, VOUT tied to AUXVCC)

• Less than 5µA (MAX) shutdown input current (IC disabled)

• Operational topologies

- Synchronous buck

- Non-synchronous buck

- Two stage boost buck

- Non-inverting single inductor buck boost

• Programmable frequency from 200kHz - 2.2MHz and

frequency synchronization capability

• ±1 Tight voltage regulation accuracy

• Reliable cycle-by-cycle overcurrent protection

- Temperature compensated current sense

- Programmable OC limit

- Frequency foldback and hiccup mode protection

• 20 Ld HTSSOP package

• AEC-Q100 qualified

• Pb-free (RoHS compliant)

Applications

• Automotive applications

• General purpose power regulator

• 24V Bus power

• Battery power

• Embedded processor and I/O supplies