ISL73007SEH中文资料Rad Hard Small Form Factor 3A Point of Load Regulator数据手册Renesas规格书

描述 Description

The ISL73007SEH is a radiation hardened Point-of-Load (POL) buck regulator that provides up to 3A of output current capability with an input voltage ranging from 3V to 18V. The device uses constant frequency peak current mode control architecture for fast loop transient response. The device uses internal compensation suitable for the entire switching frequency range or an external Type II compensation to optimize performance and stabilize the loop. The ISL73007SEH is specified over a switching frequency of 300kHz to 1MHz using an external resistor.

The ISL73007SEH integrates high-side (P-channel) and low-side (N-channel) power FETs. There are options for external or internal compensation, switching frequency, and slope control, that can be implemented with a minimum of external components reducing the BOM count and design complexity.

The ISL73007SEH includes a comprehensive suite of operational features and protections, including preset undervoltage, overvoltage, overcurrent protections, power-good, soft-start, and over-temperature.

The ISL73007SEH is designed to operate across the temperature range of -55°C to +125°C and is available in a 14-lead ceramic dual in-line flat package (CDFP) and die form.

特性 Features

• Input Bias Voltage (3V to 18V)
• Internal or external loop compensation
• 1% reference voltage over-temperature and radiation
• Switching Frequency Dependent Soft-start
• Positive and negative overcurrent, over/undervoltage, and over-temperature protections
• High 500kHz efficiency ≥90% from 1A to 3A
• 300kHz to 1MHz adjustable switching frequency
• Adjustable slope compensation
• Qualified to Renesas Rad Hard QML-V Equivalent Screening and QCI Flow (R34TB0001EU)
• All screening and QCI is in accordance with MIL-PRF-38535 Class-V
• Radiation acceptance testing
• LDR (0.01rad(Si)/s): 75krad(Si)

应用 Application

应用
• Low power auxiliary rails for FPGAs, DSPs, CPUs and ASICs