ISL6299A中文资料Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources数据手册Renesas规格书

描述 Description

The ISL6299A is a fully integrated low-cost single-cell Li-ion or Li-polymer battery charger.The charger accepts twopower inputs，normally one from a USB（Universal Serial Bus）port and the other from a desktop cradle.The ISL6299A is an ideal charger for smart handheld devices that need to communicate with a personal computer via USB.

The ISL6299A features 28V and 7V maximum voltages for the cradle and the USB inputs respectively.Due to the 28V rating for the cradle input，low-cost，large output tolerance adapters can be used safely.When both inputs are powered，the cradle input is used to charge the battery.The chargecurrent is programmable for the cradle input with a small resistor.The end-of-charge current for the cradle input isalso programmable by another external resistor.The charger incorporates Thermaguard TM which protects the IC against over temperature.If the die temperature rises above a typical value of 100℃，a thermal foldback function reduces the charge current automatically to prevent further temperature rise.The charger preconditions the battery with low current when the battery voltage is below 2.6V.Thecharger has two indication pins.The PPR（power present）pin outputs an open-drain logic LOW when either the cradle or the USB input power is attached.The CHG（charge）pin is also an open-drain output that indicates a logic LOW when the charge current is above a minimum current level.When the charge current is below the minimum current，the CHG pin indicates a logic HIGH signal and the status is latched.The latch will be reset at one of these events:（1）the part is disabled and re-enabled；（2）the selected input source has been removed and re-applied，（3）The USBON turns LOW，or（4）The BAT pin voltage falls below the recharge threshold（~4.OV）.

特性 Features

• Complete Charger for Single-Cell Li-ion/Polymer Batteries
• Dual Input Power Sources for Cradle and USB
• Low Component Count
• Integrated Pass Element
• Fixed 380mA USB Charge Current
• Programmable Cradle Charge Current
• Charge Current Thermaguard™ for Thermal Protection
• 28V Maximum Voltage for the Cradle Input
• Charge Indication
• Adapter Presence Indication
• Less than 0.5µA Leakage Current off the Battery when No Input Power Attached
• Programmable end-of-charge current with latch for Cradle Input
• Ambient Temperature Range: -40°C to 85°C
• No External Blocking Diode Required
• Pb-Free Plus Anneal Available (RoHS Compliant)

应用 Application

• Smart Handheld Devices
• Cell Phones, PDAs, MP3 Players
• Digital Still Cameras
• Handheld Test Equipment