This IC targets dual voltage hot swap applications across the +2.5V to +3.3V (nominal) bias supply voltage range with a second lower voltage rail down to less than 1V where a circuit breaker response to an over current event is preferred. It features a charge pump for driving external N-Channel MOSFETs, accurate programmable circuit breaker current thresholds and delay output undervoltage monitoring and reporting and adjustable soft-start.

Features

• Fast Circuit Breaker Quickly Responds to Overcurrent Fault Conditions

• Less than 1µs Response Time to Dead Short

• Programmable Circuit Breaker Level and Delay

• Two Levels of Overcurrent Detection Provide Fast Response to Varying Fault Conditions

• Overcurrent Circuit Breaker and Fault Isolation Functions

• Adjustable Circuit Breaker Threshold as Low as 20mV

• Adjustable Voltage Ramp-up for In-Rush Protection During Turn-On

• Rail Independent Control, Monitoring and Reporting I/O

• Dual Supply Hot Swap Power Distribution Control to <1V

• Charge Pump Allows the Use of N-Channel MOSFETs

• QFN Package:

- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline

- Near Chip Scale Package Footprint, Which Improves PCB Efficiency and has a Thinner Profile

• Pb-Free (RoHS Compliant)

Applications

• Power Supply Sequencing, Distribution and Control

• Hot Swap / Electronic Circuit Breaker Circuits

ISL6174属于集成电路（IC） > 热插拔控制器。瑞萨科技有限公司制造生产的ISL6174热插拔控制器PMIC - 热插拔控制器是能提供电路内保护和控制功能的半导体，可允许带电情况下在电路中插入或拔除其他组件。热插拔控制器可用于计算机网络和通用电源系统，主要根据输出电流、受控通道数量等特性，以及自动重试、故障超时和保护等特殊功能进行区分。