ISD5116X中文资料华邦电子数据手册PDF规格书

GENERAL DESCRIPTION

The ISD5100 ChipCorder Series provide high quality, fully integrated, single-chip Record/Playback solutions for 1- to 16-minute messaging applications that are ideal for use in cellular phones, automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port -address, control and duration selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing digital data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.

FEATURES

Fully-Integrated Solution

• Single-chip voice record/playback solution

• Dual storage of digital and analog data

• Durations

8 to 16-minute (ISD5116)

4 to 8-minute (ISD5108)

2 to 4-minute (ISD5104)

1 to 2-minute (ISD5102)

Low Power Consumption

• +2.7 to +3.3V (VCC) Supply Voltage

• Supports 2.0V and 3.0V interface logic

• Operating Current:

ICC Play = 15 mA (typical)

ICC Rec = 30 mA (typical)

ICC Feedthrough = 12 mA (typical)

• Standby Current:

ISB = 1µA (typical)

• Most stages can be individually powered down to minimize power consumption

Enhanced Voice Features

• One or two-way conversation record

• One or two-way message playback

• Voice memo record and playback

• Private call screening

• In-terminal answering machine

• Personalized outgoing message

• Private call announce while on call

Digital Memory Features

• Up to 4 Mb available (ISD5116)

• Up to 2 Mb available (ISD5108)

• Up to 1 Mb available (ISD5104)

• Up to 512Kb available (ISD5102)

• Storage of phone numbers, system configuration parameters and message address table in cellular application

Easy-to-use and Control

• No compression algorithm development required

• User-controllable sampling rates

• Programmable analog interface

• Standard & Fast mode I2C serial interface (100kHz – 400 kHz)

• Fully addressable for multiple messages

High Quality Solution

• High quality voice and music reproduction

• Winbond’s standard 100-year message retention (typical)

• 100K record cycles (typical) for analog data

• 10K record cycles (typical) for digital data

Options

• Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)

• Temperature: Commercial – Packaged (0 to +70°C) & die (0 to +50°C); Industrial (-40 to +85°C)