IS21EF08G中文资料北京矽成数据手册PDF规格书

FEATURES

• Packaged NAND flash memory with eMMC 5.1 interface

- IS21/22EF08G: 8Gigabyte

- IS21/22EF16G: 16Gigabyte

- Compliant with eMMC Specification Ver.4.3, 4.4, 4.41,4.5,4.51, 5.0, 5.1

• Bus mode

- High-speed eMMC protocol

- Clock frequency: 0-200MHz.

- Ten-wire bus (clock, 1-bit command, 8-bit data bus) and a hardware reset.

• Supports three different data bus widths: 1-bit(default), 4 bits, 8 bits

- Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz)

- Single data rate: up to 200Mbyte/s @ 200MHz (HS200)

- Dual data rate: up to 400Mbyte/s @ 200MHz (HS400)

• Operating voltage range:

- VCCQ = 1.8 V/3.3 V

- VCC = 3.3 V

• Supports Enhanced Mode where the device can be configured as pseudo-SLC (pSLC) for higher read/write

performance, endurance, and reliability.

• Error free memory access

- Internal error correction code (ECC) to protect data communication

- Internal enhanced data management algorithm

- Solid protection from sudden power failure, safe-update operations for data content

• Security

- Support secure bad block erase and trim commands

- Enhanced write protection with permanent and partial protection options

• Major supported features

- HS400, Field Firmware Update (FFU), Power Off Notification, Pre EOL information, Enhanced Device

Life time, Optimal Size.

• Major supported eMMC 5.1 features

- Enhanced Strobe, Cache Flushing Report, BKOPS Control, Cache Barrier, RPMB Throughput Improve,

Secure Write Protection.

• CMD Queuing is not supported.

• Operating Temperature:

- Industrial Grade: -40 ℃ ~ 85 ℃

- Automotive Grade (A2): -40 ℃ ~ 105 ℃

• Storage Temperature: -40 ℃ ~ 105 ℃

• Quality

- RoHS & Halogen-Free Compliance.

- TSCA Compliance

• Package

- 153 FBGA (11.5mm x 13mm x 1.0mm)

- 100 FBGA (14.0mm x 18.0mm x 1.4mm)

- Green Package (RoHS Compliant, Halogen-Free) and TSCA Compliant

GENERAL DESCRIPTION

ISSI eMMC products follow the JEDEC eMMC 5.1 standard. It is ideal for embedded storage solutions for Industrial

application and automotive application, which require high performance across a wide range of operating

temperatures.

eMMC encloses the 2D MLC NAND and eMMC controller inside as one JEDEC standard package, providing a

standard interface to the host. The eMMC controller directly manages NAND flash, including ECC, wear-leveling,

IOPS optimization and read sensing.