IRPT2059A中文资料IRF数据手册PDF规格书

The IRPT2059A Power Module

The IRPT2059A power module, shown in figure 1, is a chip and wire epoxy encapsulated module. It houses input rectifiers, brake IGBT and freewheeling diode, output inverter, current sense shunts and NTC thermistor. The 3-phase input bridge rectifiers are rated at 800V. The inverter section uses 600V, short circuit rated, ultrafast IGBTs and ultrafast freewheeling diodes. Current sensing is achieved through 45 mΩ low inductance shunts provided in the positive and negative DC bus rail. The NTC thermistor provides temperature sensing capability. The lead spacing on the power module meets UL840 pollution level 3 requirements.

• 2 hp (1.5 kW) power output Industrial rating at 150 overload for 1 minute

• 180-240V AC input, 50/60 Hz

• 3-phase rectifier bridge

• 3-phase, short circuit rated, ultrafast IGBT inverter

• HEXFRED ultrafast soft recovery freewheeling diodes

• Brake IGBT and diode

• Low inductance (current sense) shunts in positive and negative DC rail

• NTC temperature sensor

• Pin-to-baseplate isolation 2500V rms

• Easy-to-mount two-screw package

• Case temperature range -25°C to 125°C operational