IR1150I数据手册集成电路（IC）的PFC（功率因数校正）规格书PDF

描述 Description

The JPFC IR1150 is a power factor correction(PFC) control IC designed to operate in continuous conduction mode(CCM) over a wide range input line voltages. The IR1150 is based on IR's proprietary \"One Cycle Control\"(OCC) technique providing a cost effective solution for PFC.\r
\r
The proprietary control method allows major reductions in component count, PCB area and design time while delivering the same high system performance as traditional solutions.\r
\r
The IC is fully protected and eliminates the often noise sensitive line voltage sensing requirements of existing solutions.\r
\r
The IR1150 features include programmable switching frequency, programmable dedicated over voltage protection, soft start, cycle-by-cycle peak current limit, brownout, open loop, UVLO and micropower startup current.\r
\r
In addition, for low standby power requirements(Energy Star,1W Standby, Blue Angel, etc.), the IC can be driven into sleep mode with total current consumption below 200uA, by pulling the OVP pin below 0.62V.

特性 Features

• PFC with IR proprietary “One Cycle Control”\r
• Continuous conduction mode (CCM) boost type PFC\r
• No line voltage sense required\r
• Programmable switching frequency (50kHz-200kHz)\r
• Programmable output overvoltage protection\r
• Brownout and output undervoltage protection\r
• Cycle-by-cycle peak current limit\r
• Soft start\r
• User initiated micropower “Sleep Mode”\r
• Open loop protection\r
• Maximum duty cycle limit of 98%\r
• User programmable fixed frequency operation\r
• Min. off time of 150-350ns over freq range\r
• VCC under voltage lockout\r
• Internally clamped 13V gate drive\r
• Fast 1.5A peak gate drive\r
• Micropower startup (<200 µA)\r
• Latch immunity and ESD protection\r
• Parts also available Lead-Free

简介

IR1150I属于集成电路（IC）的PFC（功率因数校正）。由制造生产的IR1150IPFC（功率因数校正）功率因数校正 (PFC) 是用于调整交流电路中的电压和电流之间的相位角，使之趋近于零的半导体器件。不同模式包括平均电流、边界导通、连续导通、临界导通、电流控制式频率折返、不连续和不连续导通，开关频率从 6 kHz 至 1.7 MHz 可调。