8-port 10/100M Layer 2 + Ethernet Integrated Switch

IP178D integrates an 8-port switch controller, SSRAM, and 8 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE 802.3, IEEE 802.3u, and IEEE 802.3x specifications. The transceivers are designed in DSP approach in 0.16um technology; they have high noise immunity and robust p IP 178C pin to pin compatible\r\nSupport 2k MAC address\r\nSupport auto-polarity for 10 Mbps\r\nSupport filter/forward special DA option\r\nSupport broadcast storm protection\r\nAuto MDI-MDIX option\r\nTwo queues per port for QoS purposes\r\nSupport Port based QoS\r\nSupport 802.1p & DiffServ based ;

IC+

九旸电子

8-port 10/100M Ethernet Integrated Switch

IP178G is fabricated with advanced CMOS (85nm/Low Power) technology and only requires a 3.3V single power supply for saving BOM cost. This feature makes IP178G consumes very low power, such as the full load operation (100Mbps_FDX x8) and embedded LDO, overall power consumption only takes 0.87w. 8 port Embedded 10/100 PHY Switch Controller\r\n\r\nSupport 8 100BaseTX or 6 100Base TX + 2 FX\r\n\r\nSupport Auto MDI-MDIX function\r\n\r\nPower Management Tool (PWMT®)\r\n- APS, auto-power saving while Link-off \r\n- IEEE 802.3az protocol based power saving & 10Mbps Te for 10Mbps ;

IC+

九旸电子

8 Port FE Ethernet Switch

IP178Gx is fabricated with advanced CMOS (85nm) technology and only requires a 3.3V single power supply. This feature makes IP178GX used very low power consumption, such as the full load operation (100Mbps full duplex 8 ports), it only takes 0.95W.\n IP178Gx also supports Power Management Tool (PWMT • 8 port Embedded 10/100 PHY Switch Controller 
\n•  IP178G Support 8 100BaseTX 
\n•  IP178GH/GI support 8 100BaseTX or 6 100BaseTX + 2 FX 
\n•  100M PHY support IEEE802.3az at full duplex 
\n•  10M PHY only support 10BaseTe 
\n•  Support Auto MDI-MDIX function 
\n•  Power Management Tool (PWMT®) \n;

IC+

九旸电子