IP101A

PHY 10/100M Single Chip Fast Ethernet Transceiver; 10/100Mbps TX\r\nFull-duplex or half-duplex\r\nSupports Auto MDI/MDIX function\r\nFully compliant with IEEE 802.3/802.3u\r\nSupports IEEE 802.3u auto-negotiation\r\nSupports MII / RMII / SNI interface\r\nIEEE 802.3 full duplex control specification\r\nSupports Automatic Power Saving mode\r\nSupports BaseLine Wander (BLW) compensation\r\nSupports Interrupt function\r\nSupports repeater mode\r\nSingle 3.3V power supply with built-in 2.5V requlator\r\nDSP-based PHY Transceiver technology\r\nUsing either 25MHz crystal or 50MHz oscillator REF_CLK as clock source\r\nFlexible LED display for speed, duplex, link, activity and collision\r\nSupports flow control to communicate with other MAC through MDC and MDIO\r\n0.25µ,CMOS technology\r\n48-pin LQFP;

IP101A is an IEEE 802.3/802.3u compliant single-port Fast Ethernet Transceiver for both 100Mbps and 10Mbps operations. It supports Auto MDI/MDIX function to simplify the network installation and reduce the system maintenance cost. To improve the system performance, IP101A provides a hardware interrupt pin to indicate the link, speed and duplex status change. IP101A also provides Media Independent Interface (MII) / Serial Network Interface (SNI) or Reduced Media Independent Interface (RMII) to connect with different types of 10/100Mb Media Access Controller (MAC).\r\n\r\nIP101A is designed to use category 5 unshielded twisted-pair cable connecting to other LAN devices.\r\n\r\nIP101A Transceiver is fabricated with advanced CMOS technology, which the chip only requires 3.3V as power supply and consumes very low power in the Auto Power Saving mode. IP101A can be implemented as Network Interface Adapter with RJ-45 for twisted-pair connection. It can also be easily implemented into HUB, Switch, Router, Access Point.

IP101AH

PHY 10/100M Single Chip Fast Ethernet Transceiver; 10/100Mbps TX/FX\r\nFull-duplex or Half-duplex\r\nSupports Auto MDI/MDIX function\r\nFully compliant with IEEE 802.3/802.3u\r\nSupports IEEE 802.3u auto-negotiation\r\nSupports MII / RMII / SNI interface\r\nIEEE 802.3 full duplex control specification\r\nSupports Automatic Power Saving mode\r\nSupports BaseLine Wander (BLW) compensation\r\nSupports Interrupt function\r\nSupports repeater mode\r\nSingle 3.3V power supply with built-in 2.5V requlator\r\nDSP-based PHY Transceiver technology\r\nUsing either 25MHz crystal/50MHz oscillator REF_CLK as clock source\r\nFlexible LED display for speed, duplex, link, activity and collision\r\nSupports flow control to communicate with other MAC through MDC and MDIO\r\n0.25µ,CMOS technology\r\n48-pin LQFP, Support Lead Free package;

IP101AH LF is an IEEE 802.3/802.3u compliant single-port Fast Ethernet Transceiver for both 100Mbps and 10Mbps operations. It supports Auto MDI/MDIX function to simplify the network installation and reduce the system maintenance cost. To improve the system performance, IP101AH LF provides a hardware interrupt pin to indicate the link, speed and duplex status change. IP101AH LF also provides Media Independent Interface (MII) / Serial Network Interface (SNI) or Reduced Media Independent Interface (RMII) to connect with different types of 10/100Mbps Media Access Controller (MAC). IP101AH LF is designed to use category 5 unshielded twisted-pair cable or Fiber-Optic cables connecting to other LAN devices. A PECL interface is supported to connect with an external 100Base-FX fiber optical transceiver.\r\n\r\nIP101AH LF Transceiver is fabricated with advanced CMOS technology, which the chip only requires 3.3V as power supply and consumes very low power in the Auto Power Saving mode. IP101AH LF can be implemented as Network Interface Adapter with RJ-45 for twisted-pair connection or MAU for Fiber Connection. It can also be easily implemented into HUB, Switch, Router, Access Point.

IP101ALF

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R01

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R02

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R03

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R04

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R05

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R06

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,

IP101ALF-DS-R07

Single port 10/100 Fast Ethernet Transceiver

[IC+] GeneralDescription IP101ALFisanIEEE802.3/802.3ucompliantsingle-portFastEthernetTransceiverforboth100Mbpsand10Mbpsoperations.ItsupportsAutoMDI/MDIXfunctiontosimplifythenetworkinstallationandreducethesystemmaintenancecost.Toimprovethesystemperformance,