INA4230数据手册TI中文资料规格书

描述 Description

The INA4230 device is a quad channel 16-bit digital current monitor with an I2C/SMBus-compatible interface that is compliant with digital bus voltages from 1.2V to 5V. The device monitors the voltage across an external sense resistor and reports values for shunt voltage, bus voltage, current, power, and energy for each channel.

The INA4230 features programmable ADC conversion times and averaging that is common for all channels. Each channel has a programmable calibration value with an internal multiplier that enables direct readouts of current in amperes, power in watts, and energy in joules. Each channel monitors the bus voltage present on the IN– pin and can alert on overcurrent and undercurrent conditions, as well as on overvoltage and undervoltage conditions.High input impedance while in current measurement mode allows use of larger current sense resistors needed to measure small value system currents.

The INA4230 senses current on common-mode bus voltages that can vary from –0.3V to 48V, independent of the supply voltage. The device operates from a single 1.7V to 5.5V supply, drawing a typical supply current of 400µA in normal operation. The device can be placed in a low-power standby mode where the typical operating current is 2.5µA and can be fully disabled using the enable pin to achieve an supply current less than 1µA. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses.

特性 Features

High-side or low-side current sensing

Operates from a 1.7V to 5.5V power supply

Reports current, voltage, power, and energy

Programmable full scale range: 20mV / 80mV

Input common mode range: –0.3V to 48V

Current monitoring accuracy:

16-bit ADC resolution

0.75% gain error (maximum)

75µV offset (maximum)



Power monitoring accuracy:

1.5% full scale (maximum)



Energy monitoring accuracy:

2% full scale (maximum)



Low input bias currents: 5nA (maximum)

Low disable current: 1µA (maximum)

Configurable averaging options

Alert limits for over and under current events

1.2V compliant I2C, SMBus interface

16-pin selectable addresses

DSBGA-16 Package (1.5mm × 1.5mm)