INA232中文资料德州仪器数据手册PDF规格书
INA232规格书详情
1 Features
• High-side or low-side current sensing
• Operates from a 1.7-V to 5.5-V power supply
• Reports current, voltage and power
• Programmable full scale range: 20mV / 80mV
• Input common mode range: –0.3 V to 48 V
• Current monitoring accuracy:
– 16-bit ADC resolution
– 0.3 gain error (maximum)
– 50-μV offset (maximum)
• Low input bias current: 10 nA (maximum)
• Configurable averaging options
• General call addressing allows conversion
synchronization among devices
• Alert limits for over and under current events
• 1.2-V compliant I2C, SMBus interface
• Two device address options with four pin
selectable address
• SOT23-8 Package
• Operating temperature: –40°C and +125°C
2 Applications
• Smart speakers
• Battery chargers
• Power management
• Battery cell monitors and balancers
• Rack servers
3 Description
The INA232 device is a 16-bit digital current monitor
with an I2C/SMBus-compatible interface that is
compliant with a wide range of digital bus voltages
such as 1.2 V, 1.8 V, 3.3 V, and 5.0 V. The device
monitors the voltage across an external sense resistor
and reports values for current, bus voltage, and
power.
The INA232 features programmable ADC conversion
times and averaging. The device also has a
programmable calibration value with an internal
multiplier that enables direct readouts of current in
amperes and power in watts. The device monitors
the bus voltage present on the IN– pin and can
alert on over/under current as well as over/under
voltage conditions. High input impedance while in
current measurement mode allows use of larger
current sense resistors needed to measure small
value system currents.
The INA232 senses current on common-mode bus
voltages that can vary from –0.3 V to 48 V,
independent of the supply voltage. The device
operates from a single 1.7-V to 5.5-V supply, drawing
a typical supply current of 300 μA in normal operation.
The device can be placed in a low-power standby
mode where the typical operating current is 2.2 μA.
产品属性
- 型号:
INA232
- 功能描述:
差分放大器 Micropwr Single-sply CMOS
- RoHS:
否
- 制造商:
Texas Instruments
- 通道数量:
1 Channel
- 带宽:
2.4 GHz
- 可用增益调整:
6 dB to 26 dB
- 共模抑制比(最小值):
- 40 dB
- 工作电源电压:
4.75 V to 5.25 V
- 电源电流:
100 mA
- 最大工作温度:
+ 85 C
- 最小工作温度:
- 40 C
- 安装风格:
SMD/SMT
- 封装/箱体:
WQFN-24
- 封装:
Reel
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
TI/德州仪器 |
24+ |
TSSOP-14 |
6000 |
全新原装深圳仓库现货有单必成 |
询价 | ||
BB |
TSSOP1 |
02+ |
19 |
全新原装进口自己库存优势 |
询价 | ||
TI |
23+ |
N/A |
560 |
原厂原装 |
询价 | ||
TI |
25+ |
TSSOP-14 |
3000 |
全新原装、诚信经营、公司现货销售 |
询价 | ||
TI |
18+ |
TSSOP14 |
27386 |
全新原装现货,可出样品,可开增值税发票 |
询价 | ||
BB |
17+ |
TSSOP1 |
9988 |
只做原装进口,自己库存 |
询价 | ||
TI/TEXAS |
23+ |
原厂封装 |
8931 |
询价 | |||
TI/德州仪器 |
21+ |
TSSOP16 |
2000 |
百域芯优势 实单必成 可开13点增值税发票 |
询价 | ||
TI |
25+23+ |
TSSOP14 |
16559 |
绝对原装正品全新进口深圳现货 |
询价 | ||
TI |
20+ |
TSSOP-14 |
2960 |
诚信交易大量库存现货 |
询价 |
相关库存
更多- INA231
- INA231AIYFFR
- INA231AIYFFT
- INA231
- INA231_15
- INA231
- INA231_17
- INA2321
- INA2321EA/2K5
- INA2321
- INA2321EA/250
- INA2321EA/250G4
- INA2321EA/2K5G4
- INA2321EA/250
- INA2321EA/2K5
- INA232_V02
- INA232_V01
- INA2321EASLASH2K5
- INA2321EASLASH250
- INA2321EASLASH2K5
- INA2321EASLASH250
- INA2321EASLASH250G4
- INA2321
- INA2321EA
- INA2321EASLASH250
- INA2321EASLASH250.B
- INA2321EASLASH2K5
- INA2321EASLASH2K5.B
- INA2321EA/250.B
- INA2321EA/2K5
- INA2321EA/2K5.B
- INA2321EA/2K5G4.B