IN24LC02B中文资料INTEGRAL数据手册PDF规格书

DESCRIPTION

IN24LC02B is a 2K-bit Electrically Erasable PROM. The device is organized as a single block of 256 x 8 bit memory with a two wire serial interface.

Low voltage design permits operation down to 2.5volts with standby and active currents of only 5µA and 1mA respectively.

The IN24LC02B also has a page-write capability for up to 8 bytes of data. The IN24LC02B is available in the standard 8-pin DIP.

FEATURES

• Single supply with operation down to 2.5V

• Low power CMOS technology

- 1 mA active current typical

- 10 µA standby current typical at 5.5V

- 5 µA standby current typical at 3.0V

• Organized as a single block of 256 bytes (256x8)

• Two wire serial interface bus, I2C compatible

• Schmitt trigger, filtered inputs for noise suppression

• Output slope control to eliminate ground bounce

• 100 kHz (2.5V) and 400 kHz (5V) compatibility

• Self-timed write cycle (including auto-erase)

• Page-write buffer for up to 8 bytes

• 2 ms typical write cycle time for page-write

• Hardware write protect for entire memory

• Can be operated as a serial ROM

• Factory programming (QTP) available

• ESD protection > 3,000V

• 1,000,000 ERASE/WRITE cycles guaranteed*

• Data retention > 200 years