IM1-121EX-T中文资料图尔克数据手册PDF规格书

The 1-channel IM1-121EX-T isolating switching amplifier is equipped with an intrinsically

safe input circuit.

Sensors according to EN 60947-5-6 (NAMUR)

or potential-free contact transmitters can be

connected to the device.

The output circuits feature 2 potential-free and

short-circuit proof transistors, one of which

serves as an alarm output.

You can toggle between working or closed

current, i.e. NO or NC mode, via three switches at the front. The switching state of channel

1 is thereby transmitted to output 1.

When using mechanical contacts, wire-break

and short-circuit monitoring must be switched

off or the contacts must be wired to resistors

(II) (see circuit diagram).

The Pwr LED lights green to indicate operational readiness. The 2-color LED 1 lights yellow to indicate the switching status of the output. In the event of an input circuit error, the 2-

color LED turns red, with the input circuit monitoring switched on. Thereupon the output and

the alarm transistor are blocked.

■ 2 transistor outputs, short-circuit proof, potential-free and reverse-polarity protected

■ Common alarm output

■ Output mode adjustable (NO/NC mode)

■ Input circuits monitored for wire-break/

short-circuit (ON/OFF switchable)

■ SIL 2

■ Complete galvanic isolation

■ Input reverse-polarity protected

■ ATEX, IECEx, cUL, cFM, CSA, TR CU,

NEPSI, KOSHA, TIIS, CCOE, INMETRO

■ Installation in zone 2