FEATURES

• Two channel coupler

• SOIC-8 surface mountable package

• Standard lead spacing of 0.05

• Available only on tape and reel option

(conforms to EIA standard 481-2)

• Isolation test voltage, 4000 VRMS

• Compatible with dual wave, vapor phase and IR reflow

soldering

• Operating temperature from - 55 °C to + 110 °C

• Lead (Pb)-free component

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• AC adapters

• PLCs

• Switch mode power supplies

• DC/DC converters

• Microprocessor I/O interfaces

• General impedance matching circuits

AGENCY APPROVALS

• UL / cUL 1577

• DIN EN 60747-5-5 (VDE 0884), available with option 1

DESCRIPTION

The 100 rated ILD1206T and ILD1207T are optically

coupled pairs with a Gallium Arsenide infrared LED and a

silicon NPN phototransistor. Signal information, including a

DC level, can be transmitted by the device while maintaining

a high degree of electrical isolation between input and

output.

The ILD1206T and ILD1207T come in a standard SOIC-8

small outline package for surface mounting which makes it

ideally suited for high density applications with limited

space. In addition to eliminating through-holes

requirements, this package conforms to standards for

surface mounted devices.

A specified minimum and maximum CTR allows a narrow

tolerance in the electrical design of the adjacent circuits. The

high BVCEO of 70 V gives a higher safety margin compared

to the industry standard of 30 V.