IDT72265L20G中文资料IDT数据手册PDF规格书

DESCRIPTION:

The IDT72255/72265 are monolithic, CMOS, high capacity, high speed, low power First-In, First-Out (FIFO) memories with clocked read and write controls. These FIFOs are applicable for a wide variety of data buffering needs, such as optical disk controllers, local area networks (LANs), and inter-processor communication.

FEATURES:

• 8,192 x 18-bit storage capacity (IDT72255)

• 16,384 x 18-bit storage capacity (IDT72265)

• 10ns read/write cycle time (8ns access time)

• Retransmit Capability

• Auto power down reduces power consumption

• Master Reset clears entire FIFO, Partial Reset clears data, but retains programmable settings

• Empty, Full and Half-full flags signal FIFO status

• Programmable Almost Empty and Almost Full flags, each flag can default to one of two preselected offsets

• Program partial flags by either serial or parallel means

• Select IDT Standard timing (using EF and FF flags) or First Word Fall Through timing (using OR and IR flags)

• Easily expandable in depth and width

• Independent read and write clocks (permit simultaneous reading and writing with one clock signal)

• Available in the 64-pin Thin Quad Flat Pack (TQFP), 64-pin Slim Thin Quad Flat Pack (STQFP) and the 68-pin Pin Grid Array (PGA)

• Output enable puts data outputs into high impedance

• High-performance submicron CMOS technology

• Industrial temperature range (-40oC to +85oC) is available, tested to military electrical specifications