IDT54FCT162374ATE中文资料FAST CMOS 16-BIT REGISTER (3-STATE)数据手册Renesas规格书

描述 Description

DESCRIPTION:
The FCT16374T/AT/CT/ET and FCT162374T/AT/CT/ET 16-bit edge-triggered D-type registers are built using advanced dual metal CMOS technology. These high-speed, low-power registers are ideal for use as buffer registers for data synchronization and storage. The Output Enable (xOE) and clock (xCLK) controls are organized to operate each device as two 8-bit registers or one 16-bit register with common clock. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin.
The FCT16374T/AT/CT/ET are ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow \"live insertion\" of boards when used as backplane drivers.
The FCT162374T/AT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times– reducing the need for external series terminating resistors. The FCT162374T/AT/CT/ET are plug-in replacements for the FCT16374T/AT/CT/ET and ABT16374 for on-board bus interface applications.FEATURES:
• Common features:
   – 0.5 MICRON CMOS Technology
   – High-speed, low-power CMOS replacement for ABT functions
   – Typical tSK(o) (Output Skew) < 250ps
   – Low input and output leakage ≤1µA (max.)
   – ESD 2000V per MIL-STD-883, Method 3015;
      200V using machine model (C = 200pF, R = 0)
   – Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack
   – Extended commercial range of -40°C to +85°C
   – VCC = 5V ±10%
• Features for FCT16374T/AT/CT/ET:
   – High drive outputs (-32mA IOH, 64mA IOL)
   – Power off disable outputs permit “live insertion”
   – Typical VOLP (Output Ground Bounce) < 1.0V at VCC = 5V, TA = 25°C
• Features for FCT162374T/AT/CT/ET:
   – Balanced Output Drivers: ±24mA (commercial), ±16mA (military)
   – Reduced system switching noise
   – Typical VOLP (Output Ground Bounce) < 0.6V at VCC = 5V,TA = 25°C