ICP-10110数据手册传感器变送器的压力传感器、变送器规格书PDF

描述 Description

The ICP-10110 barometric pressure sensor is based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry leading relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 5 cm, less than the height of a single stair step.
Consuming only 1.3 µA @1 Hz, available in a small footprint 2 mm x 2.5 mm x 0.92 mm waterproof to 1.5m depth 8-pin LGA package, the ICP-10110 is ideally suited for mobile phones, wearable fitness monitoring, drones, and battery powered IoT.
The ICP-10110 offers an industry leading temperature coefficient offset of ±0.5 Pa/°C. The combination of high accuracy, low power, temperature stability, waterproofing in a small footprint enables higher performance barometric pressure sensing for sports activity identification, mobile indoor/outdoor navigation, and altitude-hold in drones.

特性 Features

• Pressure operating range: 30 to 110 kPa
• Noise and current consumption
0.4 Pa @ 10.4 µA (ULN mode)
0.8 Pa @ 5.2 µA (LN mode)
3.2 Pa @ 1.3 µA (LP mode)
• Pressure Sensor Relative Accuracy: ±1 Pa for any 10 hPa change
• Pressure Sensor Absolute Accuracy: ±1 hPa
• Pressure Sensor Temperature Coefficient Offset: ±0.5 Pa/°C
• Temperature Sensor Absolute Accuracy: ±0.4°C
• IPx8: Waterproof to 1.5m depth

简介

ICP-10110属于传感器变送器的压力传感器、变送器。由制造生产的ICP-10110压力传感器、变送器压力传感器或变送器用于检测并响应器件上作用力的存在或量变。压力类型有绝对压力、复合压力、差压、表压、密封表压、开关、真空和排气表压，工作压力为 -100 PSI (-689.48 kPa) 至 20000 PSI (137895.15 kPa)。