HV2701中文资料16-Channel Low Charge Injection High Voltage Analog Switch w/ Bleed Resistors数据手册Microchip规格书

描述 Description

HV2701 is a low charge injection, 16-channel, high voltage, analog switch integrated circuit (IC) with bleed resistors. The device can be used in applications requiring high voltage switching controlled by low voltage control signals, such as medical ultrasound imaging and piezoelectric transducer drivers. The bleed resistors eliminate voltage built up on capacitive loads such as piezoelectric transducers. Input data are shifted into a 16-bit shift register that can then be retained in a 16-bit latch. To reduce any possible clock feed-through noise, the latch enable bar should be left high until all bits are clocked in. Data is clocked in during the rising edge of the clock. Using HVCMOS technology, this device combines high voltage bilateral DMOS switches and low power CMOS logic to provide efficient control of high voltage analog signals. The device is suitable for various combinations of high voltage supplies, e.g., VPP/VNN: +40V/-160V, +100V/-100V, and +160V/-40V. *The LQFP package is not recommended for new design. Please use TQFP package as an alternative.

特性 Features

HVCMOS technology for high performance
Integrated bleed resistors on the outputs
16-channel high voltage analog switch
3.3V input logic level compatible
20MHz data shift clock frequency
Very low quiescent power dissipation (-10µA)
Low parasitic capacitance
DC to 50MHz small signal frequency response
-60dB typical OFF-isolation at 5.0MHz
CMOS logic circuitry for low power
Excellent noise immunity
Cascadable serial data register with latches
Flexible operating supply voltages

简介

HV2701属于集成电路（IC）的模拟开关-特殊用途。由制造生产的HV2701模拟开关 - 特殊用途特殊用途模拟开关通过固态设备路由模拟信号。该系列产品的与众不同之处在于，这些模拟开关针对特定的应用，因此具有通用模拟开关通常所没有的独特功能。