ROOM HUMIDITY / TEMPERATURE TRANSMITTER

PRODUCT DESCRIPTION The HTRC Humidity/Temperature transmitter incorporates two sensors in one attractive wall mount enclosure for the most efficient environmental monitoring and control system. It uses a field-proven RH sensor to monitor relative humidity and a curve-matched thermistor to m

文件：226.45 Kbytes 页数：2 Pages

GREYSTONE

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on NXP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 页数：22 Pages

恩XP

HITAG reader chip

GENERAL DESCRIPTION HITAG(1) is the family name of the reader chip HTRC11001T to use with transponders which are based on the HITAG tag ICs (HT1ICS3002x or HT2ICS2002x). The receiver parameters (gain factors and filter cut-off frequencies) can be optimized to system and transponder requirements.

文件：94.49 Kbytes 页数：20 Pages

PHI

飞利浦

HITAG reader chip

GENERAL DESCRIPTION HITAG(1) is the family name of the reader chip HTRC11001T to use with transponders which are based on the HITAG tag ICs (HT1ICS3002x or HT2ICS2002x). The receiver parameters (gain factors and filter cut-off frequencies) can be optimized to system and transponder requirements.

文件：94.49 Kbytes 页数：20 Pages

PHI

飞利浦

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on NXP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 页数：22 Pages

恩XP

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on NXP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 页数：22 Pages

恩XP

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on NXP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 页数：22 Pages

恩XP

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on NXP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 页数：22 Pages

恩XP

HITAG co-processor

GENERAL DESCRIPTION The HITAG(1) co-processor is designed to perform all computations of the read/write device in a system where HITAG1 and HITAG2 transponders are used. The device performs all encryption computations needed to access transponders and cards based on the HITAG1 respectively HITAG

文件：57.99 Kbytes 页数：8 Pages

PHI

飞利浦

HITAG读卡器解决方案

HITAG读卡器芯片HTRC110可搭配采用恩智浦HITAG应答器IC的应答器使用。\n此外，该IC还支持其他125 kHz应答器类型，采用幅度调制实现写入操作，并采用AM/PM实现读取操作。接收器参数（增益系数、滤波器截止频率）可根据系统和应答器要求进行优化。HTRC110设计为可轻松实现RF识别读卡器的集成。采用一流的技术，几乎完全集成所需的构建块。强大的天线驱动器/调制器配合低噪声自适应采样时间解调器、可编程滤波器/放大器和数字化器，共同构成了完整的收发器单元，可用在高性能读卡器设计中。采用三针脚微控制器接口来编程HTRC110以及用来实现与应答器的双向通信。连接数据的输入和输出后，三线 针对HITAG应答器IC进行了优化\n强大的天线线圈电源驱动器级，集成调制器\n高性能自适应采样时间AM/PM解调器（正在申请专利）\n读取和写入功能\n片内时钟振荡器\n天线断裂和短路检测\n低功耗\n待机模式具有极低功耗\n外部元件数量较少\n采用小型封装(SO14);

恩XP

恩智浦