HT17-076中文资料AMP数据手册PDF规格书

描述 Description

The 1240i is a low cost, programmable step

motor driver, suitable for a wide range of

motion control applications. It includes a

sophisticated controller integrated with a

50 watt microstepping amplifier.

The 1240i includes Applied Motion’s easy

to use Si Programmer™ Windows software

for the rapid development of stand

alone motion control programs. The 1240i

can also be commanded in real time from a

host PC or PLC, using the SiNet Command

Language™.

For multi-axis applications, up to eight 1240i

drives can be networked using the SiNet

Hub-8. The hub also allows the 1240i to be

mixed with any of the other six Si™ drive

models, fulfilling the exact requirements of

your application at the lowest possible cost.

The 1240i includes 8 programmable inputs

for triggering, branching, position sensing

and end of travel detection. 3 programmable

outputs can send signals to other

electronic devices and activate relays.

特性 Features

• Can be programmed for stand alone operation

with the easy to use Si Programmer™

Windows software (software and programming

cable included).

• Can be operated in real time from a host PC or

PLC using the SiNet Command Language™.

• Requires 12 – 42 VDC power supply, up to

1.5 A.

• Programmable motor current: up to 1.2

amps/phase.

• Microstepping: 2,000 – 50,800 steps/rev.

• Speeds to 50 rev/sec.

• 20 kHz PWM amplifier with mixed fast/slow

decay.

• 8 optically isolated 5 – 24 V inputs can be

configured for sinking or sourcing logic.

• 3 optically isolated outputs, 30 VDC, 100 mA.

• Automatic idle current reduction.

• Drives 4, 6 or 8 lead step motors, sizes 11 – 23.

• Compatible step motors available from stock.

• Compact size (0.7 x 3.0 x 4.0 inches).

• Four .156 inch mounting holes, 2.7 x 3.7 inch

spacing.

• Screw terminal connectors.