集成VCO 的小数N分频PLL，采用SMT封装，8.45 - 9.55 GHz

HMC767LP6CE是一款集成电压控制振荡器(VCO)的全功能小数N分频锁相环(PLL)频率合成器。 输入参考频率范围为DC至350 MHz，同时采用小数频率合成器的高级Σ-Δ型调制器设计具有超精细步长和极低杂散。 高度集成的结构提供温度、冲击和工艺变化情况下出色的相位噪声性能。 此外，HMC767LP6CE还提供扫频和调制、外部触发、双缓冲、精确频率控制、相位调制等特性。 HMC767LP6CE采用无引脚QFN 6 x 6 mm表贴封装。 \n\n有关工作原理和寄存器映射信息，请参阅“集成VCO的PLL – 微波 VCO”操作指南。 \n\n 应用 \n\n VSAT无线电 • RF带宽： 8.45 GHz至9.55 GHz \n• 超低相位噪声\n• 品质因数(FOM) \n• 24位步长，分辨率3 Hz（典型值） \n• 频率和相位调制 \n• 触发跳频 \n• 40引脚6 x 6 mm SMT封装： 36 mm² \n\n\n;

ADI

亚德诺

FRACTIONAL-N PLL WITH INTEGRATED VCO

文件：1.02048 Mbytes 页数：8 Pages

AD

亚德诺

FRACTIONAL-N PLL WITH

文件：1.11944 Mbytes 页数：8 Pages

Hittite

EPITAXIAL PLANAR PNP TRANSISTOR (SWITCHING, INTERFACE CIRCUIT AND DRIVER CIRCUIT)

SWITCHING APPLICATION. INTERFACE CIRCUIT AND DRIVER CIRCUIT APPLICATION FEATURES ● With Built-in Bias Resistors. ● Simplify Circuit Design. ● Reduce a Quantity of Parts and Manufacturing Process.

文件：69.67 Kbytes 页数：6 Pages

KEC

KEC(Korea Electronics)

EPITAXIAL PLANAR PNP TRANSISTOR (SWITCHING, INTERFACE CIRCUIT AND DRIVER CIRCUIT)

SWITCHING APPLICATION. INTERFACE CIRCUIT AND DRIVER CIRCUIT APPLICATION FEATURES ● With Built-in Bias Resistors. ● Simplify Circuit Design. ● Reduce a Quantity of Parts and Manufacturing Process.

文件：70.03 Kbytes 页数：6 Pages

KEC

KEC(Korea Electronics)

5V-to-3.3V, Synchronous, Step-Down Power-Supply Controller

General Description The MAX767 is a high-efficiency, synchronous buck controller IC dedicated to converting a fixed 5V supply into a tightly regulated 3.3V output. Two key features set this device apart from similar, low-voltage step-down switching regulators: high operating frequency and all N-c

文件：192.07 Kbytes 页数：20 Pages

Maxim

美信