50 Gbps, XOR / XNOR Module

General Description The HMC-C064 is a XOR/XNOR gate function designed to support data transmission rates of up to 50 Gbps. All input signals to the HMC-C064 are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled. The differential outputs of the HMC-C064 may be either AC

文件：185.1 Kbytes 页数：6 Pages

HITTITE

50 Gbps XOR/XNOR模块

HMC-C064是一款XOR/XNOR门功能，旨在支持最高50 Gbps的数据传输速率。 HMC-C064的输入信号都通过50欧姆电阻片上端接到地，并支持直流或交流耦合。 HMC-C064差分输出可采用交流或直流耦合。 输出可以直接连接到50 Ω接地端接系统，如果采用50 Ω端接至非接地直流电压，则可以使用隔直电容。 HMC-C064采用单个-3.3V直流电源供电，封装在密封模块中，带有1.85mm连接器。 \n\n应用\n\n• OC-768和SDH STM-256设备 \n\n• 最高50 Gbps的串行数据传输 \n\n• 最高50 Gbps的数字逻辑系统 \n\n• 宽带测试和测量 • 支持最高50 Gbps的数据速率\n• 输入内部端接50Ω电阻 \n• 支持单端或差分操作\n• 低功耗： 550mW;

ADI

亚德诺

EMI/EMC FILTER

Features - Ideally suited for products that must conform to part 15, FCC regulations - Metal cased miniature type with high performance - Meet over voltage category II of IEC 60664 and comply with [EC 60950 - Uses IEC connector that meets the safety standards from certification bodies - Bo

文件：1.16409 Mbytes 页数：2 Pages

DIT

EMI/EMC FILTER

Features - Ideally suited for products that must conform to part 15, FCC regulations - Metal cased miniature type with high performance - Meet over voltage category II of IEC 60664 and comply with [EC 60950 - Uses IEC connector that meets the safety standards from certification bodies - Bo

文件：1.16409 Mbytes 页数：2 Pages

DIT

EMI/EMC FILTER

Features - Ideally suited for products that must conform to part 15, FCC regulations - Metal cased miniature type with high performance - Meet over voltage category Il of [EC 60664 and comply with IEC 60950 - Uses IEC connector that meets the safety standards from certification bodies - So

文件：1.10602 Mbytes 页数：2 Pages

DIT