HIP6004DCR集成电路（IC）的特殊用途稳压器规格书PDF中文资料

The HIP6004D provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology. The HIP6004D integrates all of the control, output adjustment, monitoring and protection functions into a single package.

Features

• Drives Two N-Channel MOSFETs

• Operates from +5V or +12V Input

• Simple Single-Loop Control Design

- Voltage-Mode PWM Control

• Fast Transient Response

- High-Bandwidth Error Amplifier

- Full 0 to 100 Duty Ratio

• Excellent Output Voltage Regulation

- ±1 Over Line Voltage and Temperature

• TTL-Compatible 5-Bit Digital-to-Analog Output Voltage Selection

- 25mV Binary Steps . . . . . . . . . 1.100VDC to 1.850VDC

• Power-Good Output Voltage Monitor

• Over-Voltage and Over-Current Fault Monitors

- Does Not Require Extra Current Sensing Element, Uses MOSFET’s rDS(ON)

• Small Converter Size

- Constant Frequency Operation

- 200kHz Free-Running Oscillator Programmable from 50kHz to over 1MHz

• QFN Package:

- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline

- Near Chip Scale Package footprint, which improves PCB efficiency and has a thinner profile

• Pb-Free plus anneal available (RoHS compliant)

Applications

• Power Supply for K7™, and Other Microprocessors

• High-Power DC-DC Regulators

• Low-Voltage Distributed Power Supplies