Octal D-type Flip-Flops (with 3-state outputs)

Description These devices are positive edge triggered flip-flops. The difference between HD74HCT564 and HD74HCT574 is only that the former has inverting outputs and the latter has noninvertering outputs. Data at the D inputs, meeting the set-up and hold time requirements, are transferred to

文件：121.71 Kbytes 页数：9 Pages

RENESAS

瑞萨

Octal D-type Flip-Flops (with 3-state outputs)

Description These devices are positive edge triggered flip-flops. The difference between HD74HCT564 and HD74HCT574 is only that the former has inverting outputs and the latter has noninvertering outputs. Data at the D inputs, meeting the set-up and hold time requirements, are transferred to

文件：121.71 Kbytes 页数：9 Pages

RENESAS

瑞萨

Octal D-type Flip-Flops (with 3-state outputs)

Description These devices are positive edge triggered flip-flops. The difference between HD74HCT564 and HD74HCT574 is only that the former has inverting outputs and the latter has noninvertering outputs. Data at the D inputs, meeting the set-up and hold time requirements, are transferred to

文件：121.71 Kbytes 页数：9 Pages

RENESAS

瑞萨

Octal 3-State Noninverting D Flip-Flop High-Performance Silicon-Gate CMOS

The IN74HCT574A is identical in pinout to the LS/ALS574. This device may be used as a level converter for interfacing TTL or NMOS outputs to High-Speed CMOS inputs. Data meeting the setup time is clocked to the outputs with the rising edge of the Clock. The Output Enable input does not affect the

文件：114.99 Kbytes 页数：5 Pages

INTEGRAL

Integral Corp.