1-bit to 2-bit Address Driver with 3-state Outputs

Description This 1-bit to 2-bit address driver is designed for 2.3 V to 3.6 V VCC operation. To ensure the high impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current sinking capability of

文件：55.25 Kbytes 页数：11 Pages

HitachiHitachi Semiconductor

日立日立公司

1-bit to 2-bit Address Driver with 3-state Outputs

Description This 1-bit to 2-bit address driver is designed for 2.3 V to 3.6 V VCC operation. To ensure the high impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current sinking capability of t

文件：2.28183 Mbytes 页数：11 Pages

RENESAS

瑞萨

Standard IC>General-Purpose Logics>HD74ALVC Series

Renesas

瑞萨

1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS

文件：112.48 Kbytes 页数：8 Pages

TI

德州仪器

1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS

文件：288.63 Kbytes 页数：11 Pages

TI

德州仪器

1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS

FEATURES · Member of the Texas Instruments Widebus™ Family · Output Ports Have Equivalent 26-W Series Resistors, So No External Resistors Are Required · Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors · Latch-Up Performance Exceeds 250 mA Per JESD 17 ·

文件：338.12 Kbytes 页数：13 Pages

TI

德州仪器