HCPL-3000-000E中文资料Power Bipolar Transistor Base Drive Optocoupler数据手册Broadcom规格书

描述 Description

The HCPL-3000 consists of a Silicon-doped GaAs LED optically coupled to an integrated circuit with a power output stage. This optocoupler is suited for driving power bipolar transistors and power Darlington devices used in motor control inverter applications. The high peak and steady state current capabilities of the output stage allow for direct interfacing to the power device without the need for an intermediate amplifier stage. With a CMR rating of 10 kV/µs this optocoupler readily rejects transients found in inverter applications.

特性 Features

• High output current:
   IO2 (2.0 A Peak, 0.6 A continuous)
   IO1 (1.0 A Peak, 0.5 A continuous)
• 10 kV/µs minimum Common Mode Rejection (CMR) at
   VCM = 600 V
• Wide VCC range (5.4 to 13 volts)
• 2 µs typical propagation delay
• Recognized under UL 1577 for dielectric withstand proof
   test voltage of 5000 vac, 1 minuteApplications
• Isolated bipolar transistor base drive
• AC and DC motor drives
• General purpose industrial inverters
• Uninterruptable power supply

应用 Application

• Isolated bipolar transistor base drive
• AC and DC motor drives
• General purpose industrial inverters
• Uninterruptable power supply

简介

HCPL-3000-000E属于隔离器的特殊用途。由制造生产的HCPL-3000-000E特殊用途特殊用途隔离器使用单通道和双通道光电电路来执行特定任务，例如 I2C 中继器、线路接收器、电流环路接收器和发射器、光学功率转换器、光电池光耦合器、功率 MOSFET 和功率晶体管驱动器。安装类型包括表面、通孔和自由悬挂。电源电压和输出电流是关键的区分参数。