10-bit bidirectional low voltage translator

General description The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2010 provides 10 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transisto

文件：125.67 Kbytes 页数：20 Pages

恩XP

恩XP bidirectional low-voltage translators

Low cost bidirectional voltage translation without directional control Unlike level-shifting bus switches, which only translate between fixed voltages, these bidirectional low-voltage translators can translate any voltage between 1 and 5 V to any other voltage between 1 and 5 V. They also re

文件：263.32 Kbytes 页数：2 Pages

恩XP

10位双向低电压变换器

The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2010 provides 10 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF). The 10-bit bidirectional low voltage translator\nAllows voltage level translation between 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V buses, which allows direct interface with GTL, GTL+, LVTTL/TTL and 5 V CMOS levels\nProvides bidirectional voltage translation with no direction pin\nLow 6.5 Ω ON-s;

恩XP

10-bit GTL Processor Voltage Clamp

Description Within the semiconductor world, there are many I/O standards that have different voltage level requirements for the input voltage (VIH or VIL) and output voltage (VOH or VOL) typically based on the device operating voltage. These voltage levels define how the device communicates with

文件：52.76 Kbytes 页数：6 Pages

PHI

PHI