GS7103PP-R中文资料登丰微电子数据手册PDF规格书

特性 Features

Maximum 3A Low-Dropout Voltage Regulator

Ultra Low Dropout Voltage

Typically 220mV at 3A Output Current

High Output Accuracy over Line, Load and

Temperature

Build-In Soft-Start

Excellent startup under load from 0 to 3A

Power-On-Reset Monitoring on Both VDD and

VIN Pins

Power-OK Output function

Foldback over Current Protection and

Thermal shutdown

0.1μA (typ) Shutdown Supply Current

Low ESR Output Capacitor(Multi-layer Chip

Capacitors (MLCC)) Applicable

Vout Pull Low Resistance when Disable

PSOP-8, TDFN10-3x3

Green Product (RoHS, Lead-Free,

Halogen-Free Compliant)

Applications

Notebook PC Applications

Motherboard Applications

Low Voltage Logic Supplies

Microprocessor and Chipset Supplies

Graphic Cards

Cordless phones

General Description

The GS7103 can deliver up to 3A of continuous

output current with a typical dropout voltage of

only 260mV using internal n-channel MOSFETs.

The linear regulator uses a separate VDD supply

to power the control circuitry and drive the Internal n-channel MOSFETs. The output voltage is

adjustable from 0.8V to the voltage that is very

close to VIN.

The GS7103 allows the use of low-ESR ceramic

capacitor as low as 10uF. Moreover the IC

provide good performance on both line transient

response and load transient response.

The GS7103 provides foldback over current limit

and thermal shutdown to prevent the linear

regulator from damage. Built-in soft-start

minimizes stress on the input power source by

reducing capacitive inrush current on start-up.

During start-up, POK remain low until the output

reaches 92% of its rating value.

The GS7103 is available in PSOP-8 package or

TDFN10-3x3 package.