GS3470中文资料Small, Low-power 3G-SDI, HD-SDI, SD-SDI Receiver with SMPTE Audio/Video Processing and 2:1 Input Selector数据手册Semtech规格书

描述 Description

The GS3470 is a multi-rate SDI Receiver which includes complete SMPTE processing. The SMPTE processing features can be bypassed to support signals with other coding schemes. Multi-link UHD can be supported when multiple GS3470 devices are used.The device features a dual input buffer with a 2x2 MUX. The 2x2 MUX can select between either input for de-serialization and can route either of the two inputs to the serial loopback independently (reclocked or non-reclocked). In addition, the integrated Re-timer with an internal VCO provides a wide Input Jitter Tolerance (IJT).
Configurable Power-down modes are available and allows for increased flexibility. Each Power-down mode enables power savings to a varying degree by selectively enabling or disabling key features. Some of the options available in Power-down mode are CSR access, PCLK, retimed SDO loop-through output, and non-retimed SDO loop-through output. Enabling or disabling each of these options will offer power consumption levels to suit the application's requirements.
The device has three other basic modes of operation which include:
SMPTE modeDVB-ASI modeData-Through modeThe GS3470 includes an audio de-embedder and audio clocks are internally generated. Up to eight channels (two audio groups) of serial digital audio may be extracted from the video data stream, in accordance with SMPTE ST 272-C and SMPTE ST 299.
New features and benefits vs. the existing solution:
GS3470 has smaller package size, 9x9mm 100-ball BGA at 0.8mm ball pitch vs. GS2970A 11x11mm 100-ball BGA at 1mm ball pitchGS3470 has less power consumption, typical 220mW vs. GS2970A 350mW typical GS3470 fully supports 2K and multi-link UHD GS347x has two serial input ports and one internal 2x2 mux. The deserialized signal and the loop-through signal can be independently selected. GS2970A has only one serial inputEight configurable power-saving modes vs. GS2970A one standby mode

特性 Features

Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s, and 270Mb/s
Supports SMPTE ST 425 (Level A and Level B), SMPTE ST 424, SMPTE 292, SMPTE ST 259-C, and DVB-ASI
2K and Multi-link UHD support
Configurable Power-down modes
Integrated Re-timer
Serial digital reclocked or non-reclocked loop-through output
Integrated audio de-embedder for 8 channels of 48kHz audio and audio clock generation
Ancillary data extraction
Parallel data bus selectable as either 20-bit or 10-bit, SDR or DDR rate
Comprehensive error detection and correction features
Dual serial digital input buffer with 2x2 MUX
Serial Loopback independently configurable to select either input
Dual/Quad Link 3G-SDI support with multiple GS3470 devices
Output H, V, F, or CEA 861 timing signals
GSPI host interface
+1.2V digital core power supply, +1.2V and +1.8V analog power supplies, and selectable +1.8V or +2.5V I/O power supply
-20°C to +85°C operating temperature range
Low power operation – typically 220mW
Small 9mm x 9mm 100-ball BGA package (0.80mm Ball Pitch)
Pb-free and RoHS compliant

应用 Application

Monitors
DVRs
Video Switchers
Editing Systems
Cameras
Medical Imaging
Aviation, Military, and Vehicular video systems
LED Wall and Digital Signage Applications