GS1670A中文资料HD-SDI, SD-SDI and DVB-ASI Receiver with SMPTE Audio/Video Processing数据手册Semtech规格书

描述 Description

The GS1670A is a multi-rate SDI Receiver which includes complete SMPTE processing, as per SMPTE 292M and SMPTE 259M-C. The SMPTE processing features can be bypassed to support signals with other coding schemes.
The device features an Integrated Reclocker with an internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI. A serial digital loop through output is provided, which can be configured to output either reclocked or non-reclocked serial digital data. The Serial Digital Output can be connected to an external Cable Driver.
The device operates in one of four basic modes: SMPTE mode, DVB-ASI mode, Data-Through mode or Standby mode.

In SMPTE mode, the GS1670A performs SMPTE de-scrambling and NRZI to NRZ decoding and word alignment. Line-based CRC errors, line number errors, TRS errors and ancillary data check sum errors can all be detected. The GS1670A also provides ancillary data extraction. The entire ancillary data packet is extracted, and written to host-accessible registers. Other processing functions include H:V:F timing extraction, Luma and Chroma ancillary data indication, video standard detection, and SMPTE 352M packet detection and decoding. All of the processing features are optional, and may be enabled or disabled via the Host Interface.
In DVB-ASI mode, 8b/10b decoding is applied to the received data stream.
In Data-Through mode, all forms of SMPTE and DVB-ASI decoding are disabled, and the device can be used as a simple serial to parallel converter.
The device can also be placed in a lower power Standby mode. In this mode, no signal processing is carried out and the parallel output is held static.
Parallel data outputs are provided in 20-bit or 10-bit multiplexed format for HD and SD video rates. The associated Parallel Clock input signal operates at 148.5 or 148.5/1.001MHz (HD 10-bit multiplexed modes), 74.25 or 74.25/1.001MHz (for HD 20-bit mode), 27MHz (for SD 10-bit mode) and 13.5MHz (for SD 20-bit mode).
Up to eight channels, in two groups, of serial digital audio may be extracted from the video data stream, in accordance with SMPTE 272M and SMPTE 299M. The output signal formats supported by the device include AES/EBU and three other industry standard serial digital formats. 16, 20 and 24-bit audio formats are supported at 48kHz synchronous for SD modes and 48kHz synchronous or asynchronous in HD mode. Additional audio processing features include group selection, channel swapping, ECC error detection and correction (HD mode only), and audio channel status extraction. Audio clock and control signals provided by the device include Word Clock (fs), Serial Clock (64fs), and Audio Master Clock at user-selectable rates of 128fs, 256fs or 512fs.

特性 Features

Operation at 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
Supports SMPTE 292M, SMPTE 259M-C and DVB-ASI
Integrated Reclocker with low phase noise, integrated VCO
Serial digital reclocked, or non-reclocked output
Integrated audio de-embedder for 8 channels of 48kHz audio
Integrated audio clock generator
Ancillary data extraction
Parallel data bus selectable as either 20-bit or 10-bit
Comprehensive error detection and correction features
Output H, V, F or CEA 861 Timing Signals
1.2V digital core power supply, 1.2V and 3.3V analog power supplies, and selectable 1.8V or 3.3V I/O power supply
GSPI Host Interface
-20ºC to +85ºC operating temperature range
Low power operation (typically 300mW)
Small 11mm x 11mm 100-ball BGA package
Pb-free and ROHS compliant

应用 Application

Monitors
Camera control units
Multiviewers
Production switchers
Master control switchers
VTRs
Video servers
Encoders/decoders
Up/down/cross converters
Audio de-embedders
Format detectors
Test and measurement equipment