GPES220B2中文资料Easy to Use Speech, 1-CH voice Speech toys数据手册Generalplus规格书

描述 Description

The easy-to-use SOUNDPLUS II (GPESII) is an enhanced version of easy-to-use SOUNDPLUS (GPES). Many features have been added in GPES II to increase its capability and performance. One of the most significant features in GPES II is that no complex program structure is necessary. With only nine instructions and six registers, GPES II is capable of driving sophisticated tasks and playing realistic sound with simple program structure. Programmer can easily implement application rapidly and increase productivity efficiently.The GPES220B2, one of the GPES II families, stores up to 20 seconds of sound data (@ 6.0KHz sample rate). It also contains four trigger pins, eight output pins, PWM audio output, and five LED flash alternations. To assure the system reliability, a watchdog and a Low Voltage Reset (LVR) are also built in for monitoring possible critical conditions. With the high cost/performance ratio, GPES220B2 is one of the most suitable engines in the industry for vocal products.

特性 Features

• 64KB ROM SIZE
• Programmable speech synthesizer
• Operating voltage:
• 1.9V - 5.5V for 4.0MHz operating clock
• 3.6V - 5.5V for 6.0MHz operating clock

• 4 direct trigger inputs that can be extended to 36 matrix key
• Up to 8 programmable outputs
• Programmable power on initialization
• 256 voice group entries available
• Mask options: Trigger input debounce time from 5ms to 35ms
• Flexible functions through the following:
• LD (load), JP (jump) commands
• 6 registers: R0, R1, R2, R3, EN, STOP
• Conditional instructions
• Speech equation
• END instruction
• Local repeat setting
• Output frequency and LED flash type setting

• Approx. 20 sec. speech (6KHz sample rate)
• Low voltage reset function
• Watchdog function
• A pair of PWM outputs
• Flexible functions as the follows:
• Interrupt or non-interrupt for rising or falling edge of each trigger.
• Eight programmable playing modes:
• One shot
• Level hold
• Single-cycle level hold
• Complete-cycle level hold
• Sequence
• Level-Auto
• Random
• Non-retrigger

• Stop signal output setting

• Each voice section provides
• Programmable sampling frequency:
• 2K to 10K for 4.0MHz operating clock
• 2K to 15K for 6.0MHz operating clock

• Five LED flash type : On, Off, Alternatively, Synchronous, Volume-controlled
• LED: programmable

• Infrared Red (IR) communication Function
• Play Speech with tags, Seven different tags are available