FUSB302TVMPX数据手册集成电路（IC）的控制器规格书PDF

描述 Description

The FUSB302T targets system designers looking to implement a USB Type-C wall charger or Travel Adaptor. In addition to the default SRC function, the device supports DRP/ SRC/ SNK with low amount of programmability. The FUSB302T enables the USB Type-C detection including attach/detach, and orientation. The FUSB302T integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.Reference code is available for the FUSB302T for easy implementation of Type-C and USB BMC Power Delivery protocol across several embedded controller platforms. Click on the Software link below.

特性 Features

• Dual-Role Functionality with Autonomous DRP Toggle
• Applicable to many end systems
• Ability to connect as either a host or a device based on what has been attached
• Autonomous detection
• Software configurable either as a dedicated host, dedicated device, or dual role
• Offers programmability
• Dedicated devices can operate both on a Type-C receptacle or a Type-C plug with a fixed CC and VCONN channel.
• Flexibility
• Full Type-C 1.2 Support. Integrates the following functionality of the CC pin
• Meets compliance standards
• Audio Adapter Accessory Mode
• Supports USB-C audio
• Debug Accessory Mode
• Supports accessory detection
• Supports accessory detection
• Meets compliance standards
• Active Cable Detection
• Supports advance cable solutions
• Attach/Detach Detection as Host
• Current Capability Indication as Host
• Current Capability Detection as Device
• Integrates CCx to VCONN switch with over-current limiting for powering USB3.1 Full Featured cables
• Automatic GoodCRC Packet Response
• Automatic soft reset packet sent with retries if needed
• Automatic retries of sending a packet if a GoodCRC is not received
• Default CC open for SRC application.
• Automatic Hard Reset Ordered Set Sent
• Low Power Operation: ICC = 25 µA (Typical)

应用 Application

• Automotive
• PCs
• Mobile
• Wired Communication
• Desktop PCs
• Infotainment
• Mobile Handsets
• Tablets
• Travel Adapters

简介

FUSB302TVMPX属于集成电路（IC）的控制器。由制造生产的FUSB302TVMPX控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。