FT602Q-B中文资料USB3.0 UVC class to 32 bits Sync FIFO, QFN76数据手册FTDI规格书

描述 Description

The FT602 is a FIFO interface to SuperSpeed USB (USB 3.1 Gen 1) USB Video Class (UVC) bridge chip, which supports the streaming of video content from high definition camera equipment. This means that imaging systems which would have previously only been capable of delivering relatively low resolution material can gain substantially elevated video quality but still run at 60fps frame rates.

Improved performance can be benefitted from while viewing captured imaging data via standard UVC enabled hardware and commonly used media player platforms (such as VLC Player). This ensures greater convenience – with minimal investment being needed to upgrade existing systems, or to design and deploy new systems from scratch. No custom drivers are required, thereby permitting straightforward plug-and-play implementation.

The FT602 series complements FTDI Chip’s existing FT60X series incorporating the FT600 and FT601 ICs, which presents development engineers with the industry’s most comprehensive USB 3.0 portfolio. These devices are capable of providing both USB 3.0 SuperSpeed (5Gbps) and USB 2.0 High Speed (480Mbps) interfacing. They each incorporate a 32-bit parallel FIFO interface for data streaming and a UART interface for control path configuration. Supplied in 76-pin QFN packages, they have a specified working temperature range spanning from -40°C to 85°C.

Key Hardware FeaturesSupports USB 3.1 GEN 1 Super Speed (5Gbps) / USB 2.0 High Speed (480Mbps)Supports USB Transfer Types: Control/Bulk/InterruptSupports UVC version 1.1Supports multi channel FIFO interfaceSupports up to 4 video input channels on the FIFO busSupports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a date burst rate up to 400MB/s with 32 bit parallel interfaceBuilt-in 16kB FIFO data buffer RAMBuilt-in I2C master interface for video device configurationSupports multi voltage I/O: 1.8V, 2.5V and 3.3VInternal LDO 1.0V regulatorIntegrated power-on-reset circuitUser programmable USB descriptorsIndustrial operating temperature range: -40 to 85⁰CAvailable in compact Pb-free QFN-76 RoHS compliant package.PackagePartial, Tray or Reel

Part No:FT602Q (qty 1-259)Package Type:Partial (Cut Tape)Part No:FT602Q-B-T (qty 260-2999)Package Type:TRAYPart No:FT602Q-B-R (qty >=3000)Package Type:REELApplication AreasUSB 3.1 Digital Video Camera InterfaceUSB 3.1 Digital CameraMedical/Industrial imaging devicesUSB 3.1 Instrumentation

特性 Features

·Supports USB 3.1 GEN 1 Super Speed (5Gbps) / USB 2.0 High Speed (480Mbps)
·Supports USB Transfer Types: Control/Bulk/Interrupt
·Supports UVC version 1.1
·Supports multi channel FIFO interface
·Supports up to 4 video input channels on the FIFO bus
·Supports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a date burst rate up to 400MB/s with 32 bit parallel interface
·Built-in 16kB FIFO data buffer RAM
·Built-in I2C master interface for video device configuration
·Supports multi voltage I/O: 1.8V, 2.5V and 3.3V
·Internal LDO 1.0V regulator
·Integrated power-on-reset circuit
·User programmable USB descriptors
·Industrial operating temperature range: -40 to 85⁰C
·Available in compact Pb-free QFN-76 RoHS compliant package.