FT311D-32Q1C-X中文资料飞特帝亚数据手册PDF规格书

The FT311D is a Full Speed USB host specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port. The device will bridge the USB port to six user selectable interface types and has the following advanced

features:

 Single chip USB to selectable interface.

 Entire USB protocol handled on the chip. No USB specific firmware programming required.

 Interface options selectable via 3 mode select pins.

 7 GPIO lines interface option

 Basic UART interface with RXD, TXD, RTS, CTS pins option.

 TX_ACTIVE signal for controlling transceivers on RS485 interfaces.

 4 PWM channels option.

 I2C master interface option.

 SPI Slave interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options

 SPI Master interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options.

 USB error indicator pin

 Suitable for use on any Android platform supporting Android Open Accessory Mode (Typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4)

 12MHz oscillator using external crystal.

 Integrated power-on-reset circuit.

 +3V3 Single Supply Operation with 5V tolerant inputs.

 USB 2.0 Full Speed compatible.

 Extended operating temperature range; -40⁰C to 85⁰C.

 Available in compact Pb-free 32 Pin LQFP and QFN packages (both RoHS compliant).