FT232HQ中文资料USB Hi-Speed to Single Channel Serial UART/FIFO/JTAG/SPI/I2C IC, QFN-48数据手册FTDI规格书

特性 Features

·Single channel USB to serial / parallel ports with a variety of configurations.
·Entire USB protocol handled on the chip. No USB specific firmware programming required.
·USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
·Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
·UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
·USB to asynchronous 245 FIFO mode for transfer data rate up to 8 MByte/Sec.
·USB to synchronous 245 parallel FIFO mode for transfers up to 40 Mbytes/Sec
·Supports a half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).
·CPU-style FIFO interface mode simplifies CPU interface design.
·Fast serial interface option.
·FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
·Adjustable receive buffer timeout.
·Option for transmit and receive LED drive signals.
·Bit-bang Mode interface option with RD# and WR strobes
·Highly integrated design includes 5V to 3.3/+1.8V LDO regulator for VCORE, integrated POR function
·Asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
·Fully assisted hardware or X-On / X-Off software handshaking.
·UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
·Auto-transmit enable control for RS485 serial applications using TXDEN pin.
·Operation configuration mode and USB Description strings configurable in external EEPROM over the USB interface.
·Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate.
·Low operating and USB suspend current.
·Supports self powered, bus powered and high-power bus powered USB configurations.
·UHCI/OHCI/EHCI host controller compatible.#
·USB Bulk data transfer mode (512 byte packets in Hi-Speed mode).
·+1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).
·Extended -40°C to 85°C industrial operating temperature range.
·Compact 48-pin Lead Free LQFP or QFN package
·Configurable ACBUS I/O pins.

应用 Application

NumberTitleRevisionRelevant Devices