FPF2107集成电路（IC）的配电开关负载驱动器规格书PDF中文资料

特性 Features

1.8 to 5.5V Input Voltage Range

Controlled Turn-On

200mA and 400mA Current Limit Options

Undervoltage Lockout

Thermal Shutdown

<1μA Shutdown Current

Auto restart

Fast Current limit Response Time

3μs to Moderate Over Currents

20ns to Hard Shorts

Fault Blanking

RoHS Compliant

Applications

PDAs

Cell Phones

GPS Devices

MP3 Players

Digital Cameras

Peripheral Ports

Hot Swap Supplies

General Description

The FPF2100 through FPF2107 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. These devices contain a 0.125Ω current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating.

When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2100-FPF2102 and FPF2104-FPF2106, if the constant current condition still persists after 10ms, these parts will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2100, FPF2101, FPF2104 and FPF2105, have an auto-restart feature which will turn the switch on again after 160ms if the ON pin is still active. The FPF2102 and FPF2106 do not have this auto-restart feature so the switch will remain off until the ON pin is ycled. For the FPF2103 and FPF2107, a current limit condition will immediately pull the fault signal pin low and the part will remain in the constant-current mode until the switch current falls below the current limit. For the FPF2100 through FPF2103, the minimum current limit is 200mA while that for the FPF2104 through FPF2107 is 400mA.

These parts are available in a space-saving 5 pin SOT23 package.